|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
04-10-2012, 12:01 PM | #11 |
no clue
Join Date: Sep 2009
Location: spicewood, texas
Posts: 3,308
|
Re: New controller installed, slow reverse now?
this might help till scotty gets back to you. these values are best read after a full charge and resting for 12 hrs.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
04-10-2012, 12:31 PM | #12 |
Not Yet Wild
Join Date: Oct 2011
Posts: 64
|
|
04-11-2012, 10:35 AM | #13 |
Not Yet Wild
Join Date: Oct 2011
Posts: 64
|
Re: New controller installed, slow reverse now?
UPDATE: pack voltage after charging and 12 hr wait time was 39v.
While hooked to the pack, in 1/2 speed reverse, the cart goes slow but does not stop on level ground. the only time it would stall was on a slight incline in reverse when set at 1/2 speed. I was reluctant to keep on the gas as it slowed to a crawl as I am waiting on the right solenoid from Scottyb. I went ahead and stayed on it yesterday and it would climb the incline, just really slow. while maintaining 37 volts. In full speed, it will fly up the incline. After discussing with Scott, I am going to leave it there for off-road use. Also, keep in mind, my meter doesnt read in tenths. It must round to the nearest number? I need to get a cheap one for low voltage, my fluke is designed for high voltages really. Anyway, thanks for everyone's input, and as I'm sure you guys know, Scottyb is a first class guy and business. His customer service is amazing. He really takes the time to listen to what you want and help you through any issues! |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Successfully installed Excel controller on IQ Car | Electric Club Car | |||
New installed controller and motor.. stop and go problem | Electric EZGO | |||
pics of installed dcx controller? | Electric EZGO | |||
Installed New Controller | Electric EZGO |