yamaha g-22 clutch

[Plittle]

Hello All,
I have a 2007 yamaha g-22 gas cart. Been working on this dang thing forever. Barely know what im doing so im taking my lumps. Anyway, The clutch stabilizer keeps popping out of the clutch or at least I think it is because it is out on one and the other 2 are not. I came to a stop and it clunked and would not hardly go. I took the bolt out to reset the arm which was successful and it popped out again. Not sure what it is any help greatly appreciated!

#2
When the above happened i also had smoke coming out of the starter generator and it smells toasted today. Thoughts?

#3
I hear a click in my rear axle when i roll the cart.. Thoughts?
Ill snap a picture of the clutch arm/stabilizer component


Thanks in advance!!

[smallblock450sl]

The "rollers" get flat spots and when the clutch is fully engaged, it will get past the flat spot and look like the picture. Some sit sponsors sell the roller pin kits (like CPP), but you will need a special puller to get the clutch assembly off the crank.

[Plittle]

Thanks, I seen that flat spot.. its crazy they wear down that much the flat spot looks like it was made that way.