|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
06-27-2018, 06:20 PM
|
#1 |
|
Not Yet Wild
Join Date: Aug 2010
Location: Crete IL
Posts: 71
|
G2 belt problem
Sometimes I'll step on gas the belt won't engage. Belts r in good shape and changed within the past couple of yrs. I tighten the belt and worked a few times but then stopped again. When I hand turn the pulley and then hit gas it works usually. Is belt too loose too tight or is it something g like the secondary pulley???
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
06-27-2018, 07:00 PM
|
#2 |
|
Sometime's............
 Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,875
|
Re: G2 belt problem
More like worn starter brushs. I say this because you say you turn the engine alittle and it starts.
|
|
|
|
|
06-28-2018, 08:40 AM
|
#3 |
|
Not Yet Wild
Join Date: Aug 2010
Location: Crete IL
Posts: 71
|
Re: G2 belt problem
Thanks I'll look I to it
|
|
|
|
|
06-28-2018, 08:55 AM
|
#4 |
|
Not Yet Wild
Join Date: Aug 2010
Location: Crete IL
Posts: 71
|
Re: G2 belt problem
It looks like I can get to the brushes without taking the whole starter out. Is that the way to go???
|
|
|
|
|
06-28-2018, 10:53 AM
|
#5 |
|
Gone Wild
Join Date: Jun 2015
Location: NW Iowa
Posts: 1,669
|
Re: G2 belt problem
I pull the starter out I think it's easier
|
|
|
|
|
06-29-2018, 10:30 PM
|
#6 | |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G2 belt problem
Quote:
 |
|
|
|
|
|
06-29-2018, 10:31 PM
|
#7 | |
|
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: G2 belt problem
Quote:
You can get a better look inside, and blow it out with compressed air (don't breathe that stuff). |
|
|
|
|
|
06-30-2018, 12:59 PM
|
#8 |
|
Gone Wild
Join Date: May 2015
Location: Central Florida
Posts: 2,114
|
Re: G2 belt problem
To do it right you want to pull it out. Theres more to just changing the brushes and calling it a day.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| drive belt problem | Big Block Talk! | |||
| short belt problem | Gas EZGO | |||
| short belt problem | Gas EZGO | |||
| problem with short belt | Gas EZGO | |||
| 82 Clutch/Belt problem | Gas EZGO | |||
Linear Mode
