08-06-2009, 10:20 AM | #1 |
rifter
Join Date: Nov 2007
Location: Orlando Florida
Posts: 4,055
|
EZGO EH35C engine
This engine is in my neighbors WorkHorse, it runs fine until you stop and then it wants to run backwards or "diesel". He thought it had carbon buildup on the head and valves so we squirted a little ATF in the carb while it was running to break it up but it still does it, I thought it may be the wrong spark plugs, he has Champion N14YC in it now but it calls for Champion N11YC, anyone else think this might cause the problem?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-06-2009, 10:59 AM | #2 |
gone yamaha!
Join Date: Sep 2008
Location: ontario, canada
Posts: 1,424
|
Re: EZGO EH35C engine
i have a faily new exmark lawn mower that does that occationally rifter. i don't no why ither.
|
08-06-2009, 01:09 PM | #3 |
Gone Wild
Join Date: Jan 2009
Location: Alabama
Posts: 2,120
|
Re: EZGO EH35C engine
The flapper in the carb isn't closing all the way. The thottle needs to fully closed when the acc pedal switch opens and cuts power to the motor. If that doesn't do it, valve adjustment. Mine did the same thing. There an adjuster on the carb.
I would install correct plugs. That shouldn't have anything to do with afterburn...If the plugs were too hot they would burn the pistons. |
08-07-2009, 12:31 AM | #4 |
rifter
Join Date: Nov 2007
Location: Orlando Florida
Posts: 4,055
|
Re: EZGO EH35C engine
Thanks Tony, I'll check that.
|
08-07-2009, 08:18 AM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: EZGO EH35C engine
My workhorse 350 did the same thing when the solenoid was sticking A new solenoid stopped it ....
|
08-07-2009, 10:29 AM | #6 |
Gone Wild
Join Date: Mar 2008
Location: Rockwall, Texas (Dallas / Ft. Worth)
Posts: 7,077
|
Re: EZGO EH35C engine
Good points here! As you can tell, there could be a number if issues causing this. Also look at the screw on your carb, it may be screwed in too far, not allowing the butterfly to properly close...
|
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
84 EZGO Engine Swap | Gas EZGO | |||
99 Ezgo 350 engine specs | Gas EZGO | |||
91 Ezgo engine | Gas EZGO | |||
CPP engine cradle with an EZGO | Big Block Talk! | |||
EzGo Engine | Gas EZGO |