Rewiring a 1989 ezgo gas

Robin111 · 02-08-2010, 07:40 PM

hey need some help with this ,any help would be appreciative

DOOmsman · 02-08-2010, 09:05 PM

Robin we need more info Or are you looking for a basic wire diagram?

Robin111 · 02-09-2010, 05:36 AM

I bought this 89 gas ezgo and a kid had it,he tried to fix a elect problem he had jumper wires all over ,so I pulled all the jumper wires off and i'm going to rewire from srcatch,looks mostly like the motor wiring.might be a good time to change the coil and pulser too.

scottyb · 02-09-2010, 07:22 AM

Welcome Robin, If you go to the gas ezgo section and click on the Tech support, the select need a manual, diagram. Scroll down to the bottom of that page youwill find the 2 stroke 89 diagram youare looking for...

Or you can click this link and scroll to the bottom of the page?

http://www.buggiesgonewild.com/ezgo-...iagram-id.html

Robin111 · 02-09-2010, 10:08 AM

thanks guys

Robin111 · 02-09-2010, 07:01 PM

ok next problem ///weak starter/gen motor cables clean, 12.5 vts, hardly turns the gas motor, which was just rebuilt,i'm taken it off to have it rebuilt what the deal with the bolt that holds the gen on won't move, is their a trick or is it just stuck? yup stuck impact hammer fixed it thanks

Robin111 · 02-12-2010, 01:18 PM

ok guy rebuilding the start /gen says it was ok ,load tested fine ,you guys have any ideas?

DOOmsman · 02-12-2010, 02:38 PM

Is the drive belt tight and keeping it from spinning up to start? have you run the engine without the drive belt. you know kind of limber it up?

ruredy · 02-12-2010, 04:01 PM

i'd guess cables or battery not suppling enough. maybe it's just the new engines is tight.

Robin111 · 02-12-2010, 07:04 PM

the drive belt is off ,funny thing is that it is ok if i leave the plug out motor has no compresion. the starter motor turns it over fine ,,it.s not the battery i put two bats at a time on it.i'm lost.

02-08-2010, 07:40 PM	#1
Robin111 Not Yet Wild Join Date: Feb 2010 Posts: 14	Rewiring a 1989 ezgo gas hey need some help with this ,any help would be appreciative
Robin111 Not Yet Wild Join Date: Feb 2010 Posts: 14

02-08-2010, 09:05 PM	#2
DOOmsman Gone Wild Join Date: Jul 2008 Location: Reddick IL Posts: 11,220	Re: Rewiring a 1989 ezgo gas Robin we need more info Or are you looking for a basic wire diagram?

02-09-2010, 05:36 AM	#3
Robin111 Not Yet Wild Join Date: Feb 2010 Posts: 14	Re: Rewiring a 1989 ezgo gas I bought this 89 gas ezgo and a kid had it,he tried to fix a elect problem he had jumper wires all over ,so I pulled all the jumper wires off and i'm going to rewire from srcatch,looks mostly like the motor wiring.might be a good time to change the coil and pulser too.
Robin111 Not Yet Wild Join Date: Feb 2010 Posts: 14

02-09-2010, 07:22 AM	#4
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,419	Re: Rewiring a 1989 ezgo gas Welcome Robin, If you go to the gas ezgo section and click on the Tech support, the select need a manual, diagram. Scroll down to the bottom of that page youwill find the 2 stroke 89 diagram youare looking for... Or you can click this link and scroll to the bottom of the page? http://www.buggiesgonewild.com/ezgo-...iagram-id.html

02-09-2010, 10:08 AM	#5
Robin111 Not Yet Wild Join Date: Feb 2010 Posts: 14	Re: Rewiring a 1989 ezgo gas thanks guys
Robin111 Not Yet Wild Join Date: Feb 2010 Posts: 14

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

02-09-2010, 07:01 PM	#6
Robin111 Not Yet Wild Join Date: Feb 2010 Posts: 14	Re: Rewiring a 1989 ezgo gas ok next problem ///weak starter/gen motor cables clean, 12.5 vts, hardly turns the gas motor, which was just rebuilt,i'm taken it off to have it rebuilt what the deal with the bolt that holds the gen on won't move, is their a trick or is it just stuck? yup stuck impact hammer fixed it thanks
Robin111 Not Yet Wild Join Date: Feb 2010 Posts: 14

02-12-2010, 01:18 PM	#7
Robin111 Not Yet Wild Join Date: Feb 2010 Posts: 14	Re: Rewiring a 1989 ezgo gas ok guy rebuilding the start /gen says it was ok ,load tested fine ,you guys have any ideas?
Robin111 Not Yet Wild Join Date: Feb 2010 Posts: 14

02-12-2010, 02:38 PM	#8
DOOmsman Gone Wild Join Date: Jul 2008 Location: Reddick IL Posts: 11,220	Re: Rewiring a 1989 ezgo gas Is the drive belt tight and keeping it from spinning up to start? have you run the engine without the drive belt. you know kind of limber it up?

02-12-2010, 04:01 PM	#9
ruredy Born Wild Join Date: Mar 2007 Location: Clover SC. Posts: 5,552	Re: Rewiring a 1989 ezgo gas i'd guess cables or battery not suppling enough. maybe it's just the new engines is tight.

02-12-2010, 07:04 PM	#10
Robin111 Not Yet Wild Join Date: Feb 2010 Posts: 14	Re: Rewiring a 1989 ezgo gas the drive belt is off ,funny thing is that it is ok if i leave the plug out motor has no compresion. the starter motor turns it over fine ,,it.s not the battery i put two bats at a time on it.i'm lost.
Robin111 Not Yet Wild Join Date: Feb 2010 Posts: 14

Similar Threads
Thread	Forum
rewiring motor	Electric Club Car
Rewiring starter	Gas EZGO
1989 Gas EZGO	Gas EZGO
F/S 1989 EZGO Gas	Golf Carts and Parts
Rewiring carts- 48 volt	Electric EZGO