|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
03-08-2010, 07:21 PM | #1 |
Not Yet Wild
Join Date: Feb 2008
Location: Hill City, KS
Posts: 43
|
91 G8 crankcase side cover
I am trying to get the side cover off. Have moved it about half an inch, but now does not want to go either direction. I could not feel a groove on the shaft, but I am wondering if the bearing is bound up. Is there anything I needed to do other than take the cover bolts off and pull?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-08-2010, 07:52 PM | #2 | |
Sometime's............
Join Date: Oct 2007
Location: Tacoma Washington
Posts: 11,868
|
Re: 91 G8 crankcase side cover
Quote:
|
|
03-08-2010, 08:01 PM | #3 |
Gone Wild
Join Date: Feb 2009
Location: Not sure yet
Posts: 500
|
Re: 91 G8 crankcase side cover
If you didn't clean up the crank shaft before trying to take it off, I recommend that also.
|
03-08-2010, 10:25 PM | #4 |
Not Yet Wild
Join Date: Feb 2008
Location: Hill City, KS
Posts: 43
|
Re: 91 G8 crankcase side cover
Finally got it to pop off. Looks clean on the inside. Time to order a set of rings, gaskets and valve seals. Thanks for the help.
|
05-04-2010, 08:24 PM | #5 |
Not Yet Wild
Join Date: Apr 2009
Posts: 65
|
Re: 91 G8 crankcase side cover
1 valve seal ,inake side, make sure the rubber from the inside of seal is removed from the valve guide,the stick and are hard to notice,ck ur counter weight shaft holes are not worn,if so it will need to be machined and a bushing installed
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Gas in crankcase oil | Gas Club Car | |||
Re: Golf cart .vs. side by side | Golf Carts and Parts | |||
Golf cart .vs. side by side | Lifted Golf Carts | |||
Dash cover will not cover | Gas EZGO |