94 EZGO wont go

Mike B · 04-01-2010, 11:24 AM

Quote:

Originally Posted by scottyb

What is the big book?

The EZGO tech trouble shooting book.

Mike B · 04-01-2010, 12:15 PM

Quote:

Originally Posted by FIXEROFCARTS

You could bypass the controller and see if cart runs. That would tell you that the motor, F/R switch etc are all working and would point to the controller and then you would be sure.

If I bypassed the controller how much risk is there in harming the motor or any other components? Also how long can you run it like that?

scottyb · 04-01-2010, 02:52 PM

If it is a test it is not meant to be run like that. Much like a jumped solenoid. My guess is if you bypass a speed controller you will only get one speed

Mike B · 04-01-2010, 06:25 PM

Quote:

Originally Posted by scottyb

If it is a test it is not meant to be run like that. Much like a jumped solenoid. My guess is if you bypass a speed controller you will only get one speed

I ment by run, how many seconds or minutes. I have read before on some of the test, only to run so long or it can harm components.

Thanks again for all the help. I will let you know the out come when I recieve and install the new controler.

scottyb · 04-01-2010, 06:29 PM

Cool

FIXEROFCARTS · 04-01-2010, 09:46 PM

it wont hurt anything, it just direct, no controlled speed. I reread your post and I had a customer do the same thing, but only got a couple of batteries wrong. It took out the reed switch

scottyb · 04-01-2010, 09:49 PM

Quote:

Originally Posted by scottyb

Does the cart run? If not you may need to check the magnetic reed switch in the charger receptacle .....

http://www.buggiesgonewild.com/elect...ch-bypass.html

Quote:

Originally Posted by FIXEROFCARTS

it wont hurt anything, it just direct, no controlled speed. I reread your post and I had a customer do the same thing, but only got a couple of batteries wrong. It took out the reed switch

I guess we checked out the reed and micros on page 1?

Mike B · 04-02-2010, 06:57 AM

Quote:

Originally Posted by scottyb

I guess we checked out the reed and micros on page 1?

Correct. On this cart the charger recep does not have a reed switch. Should it????

Mike B · 04-03-2010, 07:29 AM

OK so UPS does not deliver on good Friday. I guess it will have to wait until next week....

04-01-2010, 02:52 PM	#23
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,408	Re: 94 EZGO wont go If it is a test it is not meant to be run like that. Much like a jumped solenoid. My guess is if you bypass a speed controller you will only get one speed

04-01-2010, 06:29 PM	#25
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,408	Re: 94 EZGO wont go Cool

04-01-2010, 09:46 PM	#26
FIXEROFCARTS Gone Wild Join Date: Feb 2009 Location: Not sure yet Posts: 500	Re: 94 EZGO wont go it wont hurt anything, it just direct, no controlled speed. I reread your post and I had a customer do the same thing, but only got a couple of batteries wrong. It took out the reed switch

04-03-2010, 07:29 AM	#29
Mike B Not Yet Wild Join Date: Sep 2008 Location: Olivia, N.C. Posts: 58	Re: 94 EZGO wont go OK so UPS does not deliver on good Friday. I guess it will have to wait until next week....

Similar Threads
Thread	Forum
87 ezgo wont run	Electric EZGO
ezgo wont go	Electric EZGO
ezgo wont go	Electric EZGO
ezgo wont go	Electric EZGO

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum