|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
05-13-2010, 11:23 AM | #1 |
Not Yet Wild
Join Date: May 2010
Posts: 54
|
G1 Governor and lift kit Question
Is there a way to bypass the governor on the G1? I was thinking about drilling the holes round in the governor arm so it just pivots on the shaft and then drill and tap a hole in the top of the shaft for a small bolt and washer to keep the arm from popping off? Also can you move the shock mounts to get a little more lift instead of buying a lift kit? If i could get a couple more inches i would be happy with that. Thanks, Gary.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-13-2010, 12:42 PM | #2 | |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: G1 Governor and lift kit Question
Quote:
Thats what she said--- Here see if this helps-- http://www.buggiesgonewild.com/gas-y...or-bypass.html http://www.buggiesgonewild.com/gas-y...govner-g1.html |
|
05-13-2010, 04:36 PM | #3 |
Not Yet Wild
Join Date: May 2010
Posts: 54
|
Re: G1 Governor and lift kit Question
Thanks for the info! And just for the record she would never be happy with just 2 more inches...
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Governor question | Gas Yamaha | |||
Governor question | On Road Golf Carts! | |||
Governor Question | Gas Yamaha | |||
G2 governor question | Gas Yamaha | |||
94 club car governor question | Gas Club Car |