|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-21-2010, 01:50 PM | #1 |
Not Yet Wild
Join Date: Apr 2010
Location: North Liberty, Ia
Posts: 20
|
wiring harness id, PLEASE HELP
I have a '99 EZ-GO Dcs electric and the soleniod is clicking, the second one i've put in. no forward no reverse, new batts. So i am triing to test the wiring and need to know what the wires on the 10pin connector go to, in order from left to right the colors are:red/orange, red, blank, blue, yellow, green, orange, green/black, black, white. I can't find schematics anywhere so if someone could list them here for me that would kick ***.
In a trouble shooting table I found, it said that the soleniod should have batt voltage going to batt post of soleniod and that there should be a .1-3 volt drop on the controller side of the soleniod, is this true? Please HELP!! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-21-2010, 04:50 PM | #2 |
Gone Wild
Join Date: Nov 2008
Location: Montgomery, AL
Posts: 1,463
|
Re: wiring harness id, PLEASE HELP
look in the stickies at top of page and you will find the wiring diagraham for the cart.
Yes you should have batt voltage coming out of solenoid goin to controller. If you have nothign coming out of controller than you have a bad controller. Good time to upgrade to a alltrax 400 unit. |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
KF82 Wiring Harness | Gas Club Car | |||
G2 gas wiring harness | Gas Yamaha | |||
wiring harness | Gas Columbia ParCar | |||
wiring harness | Golf Carts and Parts | |||
G16 wiring harness with key $50 | Golf Carts and Parts |