is 9 horse block same as 11

ford7872 · 01-13-2011, 08:45 PM

need to rebuild a motor.i have a 9 and a 11 out of two 96s but the 11 has a bad cylinder.i have been told that the crank and pistons are the only thang differant.want to build a 11 horse using the parts i have.

ford7872 · 01-14-2011, 07:14 AM

please help

scottyb · 01-14-2011, 09:25 AM

I really don't know if it is possible. I have never heard of anyone building a 350 from a 295. There are lots of interchangeable parts like cam and timing belt but there are also parts that are not. The biggest red flag I see on this is two separate gasket sets for these motors. Of course the heads are different too... I think you will run into trouble trying to make a 350 out of a 295 block. That's just my opinion until proven otherwise

Subarumouse · 01-14-2011, 12:36 PM

Hello,

This is'nt possible.

Cranck is different.
Pistons are in two ways different: - place of the pistonbolt.
- diameter of the piston.

The biggest oversize piston of a 295 gives a result of about 325 cc with a 350 cranck.
Then you have to shave the block for mor compression.
The last thing as far as i remember.

Search for "Tonyton" 295 head on a 350. and so on.

Benno

ez go go · 01-14-2011, 09:19 PM

Is the cylinder so bad off that it can't be bored?

01-13-2011, 08:45 PM	#1
ford7872 Not Yet Wild Join Date: Apr 2009 Posts: 66	is 9 horse block same as 11 need to rebuild a motor.i have a 9 and a 11 out of two 96s but the 11 has a bad cylinder.i have been told that the crank and pistons are the only thang differant.want to build a 11 horse using the parts i have.
ford7872 Not Yet Wild Join Date: Apr 2009 Posts: 66

01-14-2011, 07:14 AM	#2
ford7872 Not Yet Wild Join Date: Apr 2009 Posts: 66	Re: is 9 horse block same as 11 please help
ford7872 Not Yet Wild Join Date: Apr 2009 Posts: 66

01-14-2011, 09:25 AM	#3
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,418	Re: is 9 horse block same as 11 I really don't know if it is possible. I have never heard of anyone building a 350 from a 295. There are lots of interchangeable parts like cam and timing belt but there are also parts that are not. The biggest red flag I see on this is two separate gasket sets for these motors. Of course the heads are different too... I think you will run into trouble trying to make a 350 out of a 295 block. That's just my opinion until proven otherwise

01-14-2011, 12:36 PM	#4
Subarumouse Gone Wild Join Date: May 2008 Location: Netherlands (Europe) Posts: 170	Re: is 9 horse block same as 11 Hello, This is'nt possible. Cranck is different. Pistons are in two ways different: - place of the pistonbolt. - diameter of the piston. The biggest oversize piston of a 295 gives a result of about 325 cc with a 350 cranck. Then you have to shave the block for mor compression. The last thing as far as i remember. Search for "Tonyton" 295 head on a 350. and so on. Benno

01-14-2011, 09:19 PM	#5
ez go go Doin' the Wild Thang Join Date: Mar 2010 Location: Greenville, AL Posts: 1,063	Re: is 9 horse block same as 11 Is the cylinder so bad off that it can't be bored?

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

Similar Threads
Thread	Forum
18 horse need help	Big Block Talk!
horse before the cart	Big Block Talk!
kohler 12.5 horse in 95 ez?	Big Block Talk!
So how many horse are these old 2pg's?	Gas EZGO
horse before the carriage	Electric Club Car