92 ezgo solenoid wiring

lowlt · 04-22-2011, 03:48 PM

Hi I just picked up my first cart its a 1992 ezgo that doesn't move but picked it up cheap.

It needs new batteries which I am shopping for. My question is there is a solenoid on the drivers side and someone cut the wires to it.

I have looked everywhere to try and find what it was connected to but can't find anything. I have been searching the internet and can find a good picture to understand it.
Any help is appreciated. Thanks!

scottyb · 04-22-2011, 04:27 PM

Welcome to BGW. You will wiring diagrams for your cart at the top of this section. Click here> http://www.buggiesgonewild.com/electric-ezgo/

lowlt · 04-23-2011, 09:33 AM

thanks for the reply!
I have looked at all those diagrams but none of them have a solenoid on the drivers side.
The link below look exactly like my setup just doesn't show it. Is the solenoid I'm talking about even needed?
I will try and get a picture uploaded of it

http://www.buggiesgonewild.com/elect...-diagrams.html

scottyb · 04-23-2011, 09:52 AM

The solenoid is needed. The wiring is quite simple.
The battery main positive will go to one large terminal the other large terminal will go to B+ on the controller. That takes care of the switched connections.

The solenoid activation small terminals connect one to controller B- and the other to the Potentiometer micro-switch which has a positive 36v feed.
it does not matter which small post is pos or neg.

04-22-2011, 03:48 PM	#1
lowlt Not Yet Wild Join Date: Apr 2011 Posts: 4	92 ezgo solenoid wiring Hi I just picked up my first cart its a 1992 ezgo that doesn't move but picked it up cheap. It needs new batteries which I am shopping for. My question is there is a solenoid on the drivers side and someone cut the wires to it. I have looked everywhere to try and find what it was connected to but can't find anything. I have been searching the internet and can find a good picture to understand it. Any help is appreciated. Thanks!
lowlt Not Yet Wild Join Date: Apr 2011 Posts: 4

04-22-2011, 04:27 PM	#2
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,418	Re: 92 ezgo solenoid wiring Welcome to BGW. You will wiring diagrams for your cart at the top of this section. Click here> http://www.buggiesgonewild.com/electric-ezgo/

04-23-2011, 09:33 AM	#3
lowlt Not Yet Wild Join Date: Apr 2011 Posts: 4	Re: 92 ezgo solenoid wiring thanks for the reply! I have looked at all those diagrams but none of them have a solenoid on the drivers side. The link below look exactly like my setup just doesn't show it. Is the solenoid I'm talking about even needed? I will try and get a picture uploaded of it http://www.buggiesgonewild.com/elect...-diagrams.html
lowlt Not Yet Wild Join Date: Apr 2011 Posts: 4

04-23-2011, 09:52 AM	#4
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,418	Re: 92 ezgo solenoid wiring The solenoid is needed. The wiring is quite simple. The battery main positive will go to one large terminal the other large terminal will go to B+ on the controller. That takes care of the switched connections. The solenoid activation small terminals connect one to controller B- and the other to the Potentiometer micro-switch which has a positive 36v feed. it does not matter which small post is pos or neg.

Similar Threads
Thread	Forum
EZGo solenoid wiring needed	Electric EZGO
Need help on wiring solenoid	Electric EZGO
? for anyone re solenoid wiring..	Electric EZGO
Solenoid wiring	Electric EZGO
Solenoid Wiring Help	Electric Club Car

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum