|
Gas Club Car Gas DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
06-14-2011, 10:04 PM | #1 |
Not Yet Wild
Join Date: Jun 2011
Posts: 5
|
13 hp honda and stock clutches
I have a 2000 club car carry all 2xrt with no engine. I just picked up a 13 hp honda (ccw) rotation. Can I use my stock drive and driven clutches?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-15-2011, 07:34 AM | #2 |
The Last Moja Morani
Join Date: Jan 2007
Location: jumping from cart to cart
Posts: 8,975
|
Re: 13 hp honda and stock clutches
welcome, i,m not certain but if the drive clutch fits the new motor?? try posting this in the big block forum you,ll get more help there from guys who have done this.......but again if the clutch fits the motor right and everything lines up i couldn,t see why not........................
|
06-15-2011, 06:18 PM | #3 |
Not Yet Wild
Join Date: Jun 2011
Posts: 5
|
Re: 13 hp honda and stock clutches
Thank you, I will try that.
|
06-15-2011, 07:43 PM | #4 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,443
|
Re: 13 hp honda and stock clutches
You can look at the ramps on the secondary to see what way it rotates via the wear marks. Most all normal engines rotate CCW at the PTO end but not some CC. I'm pretty sure a CC has the same taper as other carts, but verify that, and if the new engine is a 1" shaft you can use the adapter from CPP to fit the stock clutch to it...or ask CPP they know.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2 ez-go stock clutches | Golf Carts and Parts | |||
Honda clone with stock clutch on a CC | Big Block Talk! | |||
Distance between clutches when using stock belt | Big Block Talk! | |||
Ezgo Gas Workhorse Setup for Honda,Vanguard or stock moto | Golf Carts and Parts | |||
odyssey honda FL250 (go cart on steroids) clutches | Big Block Talk! |