|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-18-2011, 09:59 PM | #1 |
Not Yet Wild
Join Date: Jun 2011
Location: Midale, Sk
Posts: 4
|
positioning ring gaps 2PG
Where do I position the ring gaps on an '84 2PG? I'm changing the crank seals & noticed weeping from the cylinder gasket, so decided to replace it.
Better yet, where could I find a shop manual for this engine? |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-18-2011, 11:31 PM | #2 |
Not Yet Wild
Join Date: Sep 2011
Posts: 3
|
Re: positioning ring gaps 2PG
In the ring grove of the piston is a little pin. The ring ends come together over this pin.
|
09-19-2011, 05:58 AM | #3 |
......................
Join Date: Apr 2009
Location: FT Lauderdale FL.
Posts: 16,416
|
Re: positioning ring gaps 2PG
|
09-20-2011, 09:10 AM | #4 |
Not Yet Wild
Join Date: Jun 2011
Location: Midale, Sk
Posts: 4
|
Re: positioning ring gaps 2PG
Thanks guys. Will let you know how it goes when parts arrive.
|
10-02-2011, 11:11 AM | #5 |
Not Yet Wild
Join Date: Jun 2011
Location: Midale, Sk
Posts: 4
|
Re: positioning ring gaps 2PG
Got it back together, runs great. Took the oil injection pump off & am mixing oil.
EzGo couldn't supply the crank seals. Picked them up at a bearing supply store. They are metric seals, Daemar 30447 - DL. |
|
|
Similar Threads | ||||
Thread | Forum | |||
Piston Ring Gaps | Gas Club Car | |||
Windshield winter gaps | Golf Carts and Parts | |||
Ring gap | Gas Yamaha | |||
Ring help | Gas Yamaha | |||
ring gap g1 | Gas Yamaha |