|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
03-04-2012, 09:53 AM | #1 |
Not Yet Wild
Join Date: Apr 2010
Location: Dardanelle, Arkansas
Posts: 14
|
Need some advise with factory spindles on RXV
I have been Chasing a rattle in my front end of my 2008 RXV. I have finally realized it was coming from the spindle. It has enough slack in the kingpin that it is letting the spindle move in and out at the top and bottom where it mounts on the shock tower bracket. Bolt and nut that goes through kingpin was tight. Thrust washer on top of spindle looked ok. Any suggestions or updates on fixing this would be greatly appreciated.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Club Car Spindles | Golf Carts and Parts | |||
wtb spindles | Golf Carts and Parts | |||
Bent Spindles 09 ST | Lifted Golf Carts | |||
Bent spindles? | Gas EZGO | |||
ezgo spindles | Golf Carts and Parts |