|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
09-11-2012, 10:34 AM | #1 |
Not Yet Wild
Join Date: Aug 2012
Posts: 30
|
1 gu cables vs 2 gu with a DCX600
Would there be any benefit or advantage to use 1 gu cables instead of 2 gu when installing a dcx600 on an otherwise stock 48v CC IQ?
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-11-2012, 12:15 PM | #2 |
Gone Wild
Join Date: Oct 2008
Location: Ga
Posts: 740
|
Re: 1 gu cables vs 2 gu with a DCX600
Zach,
If it was me I would go with the 1 Guage cables, you can look it like your building for the future. Are you doing your own cables? where can you get 1 guage wire and ends to fit it? Crimping is very important as I am learning. Good luck... Steve PS. are you in a chair because of a SCI? |
09-11-2012, 12:21 PM | #3 |
Gone Wild
Join Date: Jul 2012
Posts: 366
|
Re: 1 gu cables vs 2 gu with a DCX600
Tough question, with a stock motor prob not. Even with a reworked motor you prob wont see any "advantage" especially if there is a big cost difference. But if you already have the cable laying around then it certainly wont hurt.
I recently switched from high strand count cables on the motor to controller and f&r switch and auto store 4 gauge battery to battery connections and I picked up a little torque and speed with my alltrax650 and d&d motor. More stable speed as well.. All that said Scotty sells a great product at a great price. Youd be hard pressed to make your own for anywhere near that price.. |
09-11-2012, 01:18 PM | #4 |
Gone Wild
Join Date: Oct 2008
Location: Ga
Posts: 740
|
Re: 1 gu cables vs 2 gu with a DCX600
Zach I agree with IMSWEST, ScottyB has some great cables, I only saved about $40 doing my own vs if I bought Scottys and I'm having probs with my crimp ends I did my self. I'm going to pull all of mine back off and recrimp.
Steve |
|
|
Similar Threads | ||||
Thread | Forum | |||
Club Car IQ controller upgrade to alltrax dcx600 | Electric Club Car | |||
Cables | Gas Yamaha | |||
1/0 Battery Cables to 6 AWG Motor Cables | Electric EZGO | |||
what will changing my cables to 4g welding cables do to my performance exactly | Electric EZGO | |||
Dcx600 | Electric EZGO |