Marathon glove boxes

Yeoman · 03-07-2019, 02:51 PM

My '93 Marathon will be living under cover but not fully enclosed. I've fought nest building wrens and mice in the tractor that was living there prior. The space behind the dash accessed through the glove boxes is going to be a magnet to them. I don't want to close in the glove boxes as I anticipate having miscellaneous items in and out of them. Are there dividers I could install to separate the glove boxes from the rest of the space behind the ball storage area? I'm considering fabricating those but the measurements are squirrelly with curvatures and back to front tapers. Any ideas?

Yeoman · 03-07-2019, 03:10 PM

Just occurred to me. Prior owner had a radio installed (removed before I acquired the cart). Wondering if he cut away what was there, leaving it open like this, in which case "dividers" would not be an available item. Have to check more closely when I get home.

mcdonaldmarcos1 · 03-07-2019, 07:34 PM

Not sure if your dash is the same as my 82 marathon but what I did was used card board to cut and fit in there as tight as possible and traced it to wood took then went from there took some time but worked out pretty good for me

Yeoman · 03-08-2019, 01:22 PM

Used your cardboard idea the traced on polyethylene. Came out better than expected. Thanks!

Brob1969 · 03-08-2019, 01:53 PM

Looks great.

Yeoman · 03-09-2019, 10:02 AM

Thanks

03-07-2019, 02:51 PM	#1
Yeoman Not Yet Wild Join Date: Jan 2019 Posts: 22	Marathon glove boxes My '93 Marathon will be living under cover but not fully enclosed. I've fought nest building wrens and mice in the tractor that was living there prior. The space behind the dash accessed through the glove boxes is going to be a magnet to them. I don't want to close in the glove boxes as I anticipate having miscellaneous items in and out of them. Are there dividers I could install to separate the glove boxes from the rest of the space behind the ball storage area? I'm considering fabricating those but the measurements are squirrelly with curvatures and back to front tapers. Any ideas?
Yeoman Not Yet Wild Join Date: Jan 2019 Posts: 22

03-07-2019, 03:10 PM	#2
Yeoman Not Yet Wild Join Date: Jan 2019 Posts: 22	Re: Marathon glove boxes Just occurred to me. Prior owner had a radio installed (removed before I acquired the cart). Wondering if he cut away what was there, leaving it open like this, in which case "dividers" would not be an available item. Have to check more closely when I get home.
Yeoman Not Yet Wild Join Date: Jan 2019 Posts: 22

03-08-2019, 01:53 PM	#5
Brob1969 Gone Wild Join Date: Feb 2019 Location: North Florida Posts: 271	Re: Marathon glove boxes Looks great.

03-09-2019, 10:02 AM	#6
Yeoman Not Yet Wild Join Date: Jan 2019 Posts: 22	Re: Marathon glove boxes Thanks
Yeoman Not Yet Wild Join Date: Jan 2019 Posts: 22

Similar Threads
Thread	Forum
GMT Glove boxes	Electric EZGO
93 Marathon Glove box idea	Design Center
91 DS Glove Boxes	Electric Club Car
wtb g2 air boxes	Golf Carts and Parts
Cargo boxes	Design Center

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum