04-23-2009, 09:00 PM | #1 |
Not Yet Wild
Join Date: Feb 2009
Posts: 33
|
2001 EZGO question.
I had a four prong ignition switch in my cart. So yesterday I switched it out for a two prong switch. Now here's the problem. It has LEDS and regular lights. I put a switch in for the LEDS to work. and it already had a switch for the head lights. Now hears what I don't under stand. I had to cut into the power line coming from the battery to get the lights to come on when I turned on the LEDS.I hooked up the ignition switch but for some reason I have a green wire left over. and everythings works without it. Does anyone know what color wire's go where? Also when I turn on the key the motor starts right up at idle. I'm not sure if this was the same when I bought it last year or not. Now what I want to know it,Can I run it like this. It seems fine .Only when I want to change gears I have to shut off the engine first the turn the key back on after turning the handle. Confused,? I am.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
2001 ezgo with 4cyl. for sale | Golf Carts and Parts | |||
2001 DS Rebuild Question | Electric Club Car | |||
2001 EZGO Freedom | Electric EZGO | |||
2001 EZGO Electric | Electric EZGO | |||
2001 ezgo gas | Gas EZGO |