|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
07-31-2014, 12:05 PM | #1 |
Not Yet Wild
Join Date: May 2014
Location: North Georgia Mountains
Posts: 41
|
4GA Cable Upgrade - incomplete?
I was reviewing Scotty B's cable upgrades and took another look at my cables. It appears that a previous owner upgraded the cables between the batteries in the pack and from the controller to motor (A1/A2) to 4GA, but didn't upgrade from the pack to the controller and from controller to solenoid.
Am I wrong, or did they do a halfa55 job of the upgrade. As I see it, there is no benefit to me without all being 4GA... If that is the case, I guess I will need to replace those four wires as well with 4GA. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-31-2014, 12:24 PM | #2 |
Gone Wild
Join Date: Apr 2013
Location: Deep Run, NC
Posts: 2,544
|
A chain is only as strong as it's weakest link. Replace the rest of them.
|
07-31-2014, 12:33 PM | #3 |
Not Yet Wild
Join Date: May 2014
Location: North Georgia Mountains
Posts: 41
|
Re: 4GA Cable Upgrade - incomplete?
heading off to the welding supply store... thank goodness there are only four that need replacing.
Thanks! |
|
|
Similar Threads | ||||
Thread | Forum | |||
Cable upgrade with OBC | Electric Club Car | |||
Cable Upgrade | Electric EZGO | |||
ez-go pds cable upgrade | Electric EZGO | |||
Cable upgrade | Electric Club Car | |||
Cable upgrade | Electric Club Car |