|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-01-2014, 09:49 PM | #11 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: 1989 ezgo rough running
Check clutches and motor mounts...
Belt should be 1-3/16" wide. Not sure of the length. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-02-2014, 07:21 PM | #12 |
Getting Wild
Join Date: Aug 2014
Location: West Michigan
Posts: 104
|
Re: 1989 ezgo rough running
Belt was 1 3/16 right on the nose. Driven clutch looked good to me. Didn't see any big signs. Drive clutch has one "pin" that the weight is forces up against when spun that appears to be a bit worn. Is there a rebuild for the drive clutch? Also just as u said both rubber engine mounts in the rear are wore out for sure. Not sure how u seen that from my video but great call !! Didn't have much time to totally remove mount. Do I need to remove by drilling out the pop rivets ?
|
09-02-2014, 07:27 PM | #13 | |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: 1989 ezgo rough running
Quote:
I don't know of any rebuild kits for the stock clutch. |
|
09-02-2014, 07:48 PM | #14 |
Getting Wild
Join Date: Aug 2014
Location: West Michigan
Posts: 104
|
Re: 1989 ezgo rough running
Yep torn through. Center not even attached. Man looking at the inside parts of that drive clutch one would think u could replace some parts pretty easily. Bad mounts could be reason for belt not climbing to top of clutch you thinking? Back to ordering parts i go lol. Anything else I should be checking out before i place another order ? Thanks again for all your Responses 89
|
09-02-2014, 07:51 PM | #15 | |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: 1989 ezgo rough running
Quote:
New rubber mounts should fix the issue. |
|
09-02-2014, 08:04 PM | #16 |
Getting Wild
Join Date: Aug 2014
Location: West Michigan
Posts: 104
|
Re: 1989 ezgo rough running
haha. im not a go fast freak................. yet but with your help I will get there
|
09-02-2014, 08:08 PM | #17 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: 1989 ezgo rough running
|
09-02-2014, 08:08 PM | #18 |
Getting Wild
Join Date: Aug 2014
Location: West Michigan
Posts: 104
|
Re: 1989 ezgo rough running
im on it.
haha. im not a go fast freak................. yet but with your help I will get there |
09-02-2014, 08:12 PM | #19 |
Getting Wild
Join Date: Aug 2014
Location: West Michigan
Posts: 104
|
Re: 1989 ezgo rough running
no problem checking welds here. im a welding engineer. one thing I can do is weld.
|
09-02-2014, 08:14 PM | #20 |
Gone Wild
Join Date: Oct 2010
Posts: 6,730
|
Re: 1989 ezgo rough running
|
|
|
Similar Threads | ||||
Thread | Forum | |||
g2a running really rough | Gas Yamaha | |||
running rough | Gas Columbia ParCar | |||
G9 running rough | Gas Yamaha | |||
'86 running rough | Gas EZGO | |||
G16 running rough | Gas Yamaha |