lifted club cars - lifted ezgo
Home FAQDonate Who's Online
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles



Post New Thread  Reply
 
Thread Tools Display Modes
Old 09-15-2009, 11:55 PM   #1
aaumpine
Not Yet Wild
 
Join Date: Sep 2009
Posts: 3
Default newbie question on the g1's

Yes yet another Newbie. Got an old G1 sitting in my garage. It was free!!
It runs fine. I have to put a new key on the tranny shaft. I have the large spring, and the two aluminum disc. The key and the nut on the end of the shaft are missing. Can anyone tell me what size key and nut I need. Oh yea, I'm missing the cotter pin as well. Any help would be great.

Aaron Champagne
aaumpine is offline   Reply With Quote
Alt Today
BGW

Golf car forum Sponsored Links

__________________
This advertising will not be shown in this way to registered members.
Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum
   
Old 09-18-2009, 10:05 PM   #2
aaumpine
Not Yet Wild
 
Join Date: Sep 2009
Posts: 3
Default Re: newbie question on the g1's

Okay guys, I have the back pulleys on along with the spring which is still compressed. Can anyone tell me what size nut fits on the end of the shaft. According to the serial numbers it's a 1981 G1. I have an extra lug nut from my Airstream on there now. I have it hand tight just enough to hold everything in place. I have tried several different types including metric course and fine thread. Any help would be great.
Aaron
aaumpine is offline   Reply With Quote
Old 09-20-2009, 12:47 PM   #3
FASTANDSTUPID
Not Yet Wild
 
FASTANDSTUPID's Avatar
Yamaha
 
Join Date: Sep 2009
Location: Bastrop, Tx
Posts: 31
Default Re: newbie question on the g1's

Its a metric 12x1.25, Im not sure what size the key is.
FASTANDSTUPID is offline   Reply With Quote
Old 05-31-2014, 02:11 AM   #4
Natural Ice
Not Yet Wild
Yamaha
 
Join Date: May 2014
Location: south central MN
Posts: 1
Default Re: newbie question on the g1's

I picked up a 1980 G1 and the screws fell out of the magneto and trashed the flywheel and windings. Got to ride it for about 15 min. Need parts ASAP. Can anyone help.
Natural Ice is offline   Reply With Quote
Old 05-31-2014, 06:57 AM   #5
slonomo
Searching for The Way
 
slonomo's Avatar
Yamaha
 
Join Date: Oct 2009
Location: Medina, Ohio (NEOHIO)
Posts: 10,919
Default Re: newbie question on the g1's

Try starting your own thread, might get more response.
slonomo is offline   Reply With Quote
Reply
Go Back   Buggies Gone Wild Golf Cart Forum > Golf Cart Repair and Troubleshooting > Gas Yamaha


Thread Tools
Display Modes


Similar Threads
Thread Forum
Newbie question... Lifted Golf Carts
newbie question Big Block Talk!
newbie question Electric Club Car
Big block G1's Big Block Talk!
Another newbie question Gas EZGO


All times are GMT -5. The time now is 07:58 PM.


Club Car Electric | EZGO Electric | Lifted Golf Carts | Gas EZGO | Used Golf Carts and Parts

Powered by vBulletin® Version 3.8.9
Copyright ©2000 - 2022, vBulletin Solutions, Inc.
This Website and forum is the property of Buggiesgonewild.com. No material may be taken or duplicated in part or full without prior written consent of the owners of buggiesgonewild.com. 2006-2017 Buggiesgonewild.com. All rights reserved.