|
|
|||||||
| Electric Club Car Electric DS, and Precedent golf cars |
  |
|
|
Thread Tools | Display Modes |
06-22-2020, 10:16 AM
|
#1 |
|
Not Yet Wild
Join Date: Dec 2012
Posts: 54
|
Help connecting Voltage Reducer to Light Kit
Hi guys - Can anyone help me with connecting a voltage reducer to my light kit? Instructions say to "separate the VR (voltage reducer) disconnects in the light wire harness and install the VR in the circuit."
I have no idea where i attached the 12 volt accessory leads coming out of the VR to the light wire harness. Do they connect to the cart 12 prong bucket harness in the dash or to the light harness that connects to the 12 prong that goes to the front light? My precedent is the 2008 with the bucket harness already installed in the cart. Light kit is: LGT306E. VR is just a 25 amp 36/48V to 12V with wires coming out. (no harness with prongs on the VR). Any help is greatly appreciated. |
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
||||||
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| LED Light Kit / Voltage Reducer? | Electric EZGO | |||
| Voltage reducer to light bar | Electric Club Car | |||
| Right voltage reducer for my light kit??? | Electric Club Car | |||
| Cheap voltage reducer. Sparks when connecting. | Lifted Golf Carts | |||
| Connecting Voltage Reducer | Harley Davidson | |||
Linear Mode
