NEED Shocks 17548G1

[Coltf1991]

You have more pictures of the spring perch that is mounted onto the strut body?

[Coltf1991]

I am getting very close. I need you to go to the supplied Monroe guide above, shoot on down to page 5 where you will see the different mounting styles. At the top of that page in the middle, you will see "Loop Mounting." Then on the illustration below that you will see an "A" and "B" for sizing. Just below that is the chart that is going to give me the information I need to complete your shock finding.

Once you have figured out your "A" and "B" measurements, that will tell us exactly what ends you have on your shocks.(L1, L2, L3, L4 or L5) After that its only a matter of matching them up according to compressed and extended lengths

Colton

[biscwgn]

Alright they are 5/8" by 1 5/16" should be a L1 according to the chart
i measured what would be the top of the shock when on the golf cart
also if you notice on the pics where the spring sits is not level has a angle to it
hard to see in pics, also thanks i would be lost on this deal without your help

[Coltf1991]

Are your top and bottoms L1 or just the top? If so what style is the bottom? It should also be an L1

[biscwgn]

Alight the top is forsure a L1 the bottom the A measures 1" and the B measures 1 1/4"
but a L1 top and bottom will work the frame on ezgo and the rear end are drilled for 3/8" mounting bolts and the shocks all have brass inserts inside the metal sleeves top and bottom on the shocks we are getting close hope this helps

[biscwgn]

any luck?

[biscwgn]

ttt

[Coltf1991]

Man, every shock I am finding seems to be too long for the measurements you have supplied. So would give you some lift. I am still in the hunting phase of the perfect match.

[biscwgn]

If you want to give me the measurements of the closest match you have found and
it might work maybe i measured wrong?

[biscwgn]

TTT