golf cart wont move

[billydemp]

So do I just check the wiring from the pedal?

[JohnnieB]

Originally Posted by billydemp

I checked the pedal and it does make a click sound so could it be something else?

The click is probably the microswitch in the pedal box (MS-3), but is it connected to anything electrically?

Jack rear wheels off ground so cart doesn't move unexpectedly.

Attach the Negative lead of your DVM to the Negative terminal of the right-rear battery (as shown on attached drawing) and touch the Positive lead to the small terminal on the solenoid with the two red wires and diode cathode (Banded end) attached.

With key on and F or R selected, you should read B+ (Battery Pack Voltage) when pedal is pressed.

If not, start tracing back along the circuit marked in RED on the schematic attached to my previous post.
The fault will lie between the first place you find B+ and the last place you didn't.

[billydemp]

got the cart checked out and the thought is it needs a controller, any thoughts on costs?thanks