|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
11-29-2015, 08:20 PM | #11 |
Gone Wild
Join Date: Apr 2011
Location: Washington State
Posts: 385
|
Re: ezgo driven clutch shaft size?
i received a cart that had been driven with the bolt out and it ruined the splines in the clutch, but didnt damage the spline on the transmission. In your case it appears the shaft splines were worn off and clutch splines also damaged. So it appears you will need to replace the input shaft to the me29, which requires dis-assembly of transmission. Talk to sponsor will help you. So the clutch you received is ok, now shaft problem needs to be fixed.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
12-04-2015, 09:23 PM | #12 |
Not Yet Wild
Join Date: Nov 2015
Posts: 13
|
Re: ezgo driven clutch shaft size?
Figured out the issue . The bolt and spacer must have fallen out a while ago . Because it is the correct shaft but what happened was the old clutch must have been wobbling a lot and actual wore the spline to look like a taper . So i used a die grinder to cleaned up the shaft and was able the get the new clutch on . Hopefully it last for while . Thanks for the help .
|
12-05-2015, 06:09 PM | #13 |
Not Yet Wild
Join Date: Nov 2015
Posts: 13
|
Re: ezgo driven clutch shaft size?
Didn't see your post before I posted .
That is exactly what happen . But was able to save the shaft . Thanks again for your help . |
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Broken Bolt in spline shaft for driven clutch | Gas EZGO | |||
ezgo driven clutch shaft seal replacement | Gas EZGO | |||
what size is the ezgo clutch shaft | Gas EZGO | |||
Driven Clutch Seized to the Shaft | Gas Club Car | |||
G2 driven clutch shaft broke off rear | Gas Yamaha |