2004 PDS wiring...

[JohnnieB]

Originally Posted by ncseadad

OK..thanks a million...this is the diagram I was looking for...HOWEVER...one of the two is marked backwards....for example...on the one JohnnieB sent A1 from motor goes to M- on controller and A2 goes to F/R switch....On the one Sir Nuke sent A1 from motor goes to F/R switch and A2 goes to M-......

If the one JohnnieB sent is correct, which one of the letters (ABCD) is the top post on the F/R switch in the golf cart....

The "C" stud is at the top and the "A" stud is at the bottom.

That unusual labeling order came about by the fact that the F/R switch assemble was originally used in Marathon carts and was top mounted. When EZGO reused the F/R switch assemble in the Medalist and later in the TXT, they rotated it 180° to bottom mount it and did same with the labeling so the A stud continued to be the one closest to the mounting bolts.

[ncseadad]

Thanks to all three of my number 1s. The cart is up and running thanks to all...what I thought was amazing is the owner brought me the cart with the old F/R switch removed and two wires connected on the new F/R switch WITHOUT disconnecting any batteries and the controller was still good...apparently no arcing.

Thanks again guys....Bill