03-05-2017, 07:22 PM | #1 |
Not Yet Wild
Join Date: Nov 2011
Posts: 41
|
Keyswitch wires
Hello everyone,
Installed headlights today on my 2009 DS gasser. I broke off the ear for the ignition wire on the keyswitch when removing the dash panel. I picked up a temporary switch. Cart works fine without the white and white w/ black wires hooked up because I only could get a 3 pole switch. It appears those wires get grounded through the keyswitch when key is off and go open when key is turned to run. I will pick up the correct switch tomorrow but was just wondering how that works. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
03-05-2017, 08:33 PM | #2 |
Guest
Posts: n/a
|
Re: Keyswitch wires
white and black go to rev limiter white goes to f/r limit switch Last edited by crash test dummy; 03-05-2017 at 08:38 PM.. Reason: corrected |
03-05-2017, 09:54 PM | #3 |
Not Yet Wild
Join Date: Nov 2011
Posts: 41
|
Re: Keyswitch wires
Thanks Crash Test,
Makes sense now why the cart still ran with wires not connected. |
03-06-2017, 04:49 PM | #4 |
Not Yet Wild
Join Date: Feb 2017
Location: Detroit
Posts: 9
|
Re: Keyswitch wires
what lead would you use for off on when installing a radio?
|
03-06-2017, 06:16 PM | #5 |
Not Yet Wild
Join Date: Nov 2011
Posts: 41
|
Re: Keyswitch wires
The #1 terminal. The blue and yellow wires are connected to it.
|
03-06-2017, 06:43 PM | #6 |
Guest
Posts: n/a
|
Re: Keyswitch wires
|
03-07-2017, 10:21 AM | #7 |
Not Yet Wild
Join Date: Feb 2017
Location: Detroit
Posts: 9
|
Re: Keyswitch wires
Thanks guys !!!
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Harley keyswitch? | Electric EZGO | |||
PDS Keyswitch Question | Electric EZGO | |||
WTB EZ go TxT keyswitch and plate | Golf Carts and Parts | |||
will this keyswitch work??? | Big Block Talk! | |||
Keyswitch or Solenoid | Electric EZGO |