|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-25-2020, 10:21 AM | #1 |
Not Yet Wild
Join Date: Jan 2020
Posts: 14
|
Controller Problem????
My Bad Boy Ambush came with a Curtis 1234 controller, yet at some point one of the repairs guys I took it to change out the controller to a Curtis SepEx 1268. It doesn't look like they changed any of the wiring, just a swap out. My buggy goes forward but if I stop for more than 6 seconds it clicks off into fault mode. If I try to go into reverse it rocks forward than goes into fault mode. Fault 13, according to the SepEx manual this is a speed sensor fault, which I have changed out, but there is no difference.
Is this a controller problem? Should I buy a Curtis 1234 or a Curtis SepEx to replace it? Do I have to worry about finding someone to program it or is it just a straight swap out? Or do I need to look at all my wires for a short? Thanks for your input! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Controller Problem??? | Electric Club Car | |||
controller problem? | Electric Club Car | |||
IQ won't go, Controller Problem? | Electric Club Car | |||
is this a controller problem | Electric Club Car | |||
is this a controller problem | Electric Club Car |