|
|
|||||||
| Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
  |
|
|
Thread Tools | Display Modes |
03-31-2011, 11:53 PM
|
#1 |
|
Not Yet Wild
Join Date: Jan 2010
Posts: 2
|
1988 Marathon Dana Differential Issues
I started going through the 1988 marathon cart I purchased. I have not yet been able to get the splined rear hub off of the axle. It appears that it is a Dana differential. I found some diagrams and the axle is held in place by two retaining rings near the outside end of the axle. I assume their internal rings within the axle housing. If I could get the axle out with the hub on it I could press the axle out. So far I have just bent two pullers on the hub. Any suggestions on how to get the hub out of the way to get to the retaining rings so I can replace the seals and bearings??
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
04-01-2011, 07:16 AM
|
#2 |
|
no clue
 Join Date: Sep 2009
Location: spicewood, texas
Posts: 3,308
|
Re: 1988 Marathon Dana Differential Issues
you need a puller like this. maybe rent one from autozone or someone?
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Dana Differential..... | Electric EZGO | |||
| 1988 Marathon | Electric EZGO | |||
| Can You Identify this Dana Differential? | Electric Club Car | |||
| Changing differential lube in a DANA rearend | Ezgo Gas Tech | |||
Linear Mode
