HD Cam backwards? buzzer goes off in FWD

pernellj954 · 08-23-2011, 02:52 PM

I've just tightened everything up from going to 48V and I'm wondering if the HD Cam I put in might be turned the wrong way b/c when I try to connect the Neg battery cable, the buzzer is going off, in FWD. Thanks for your help!

pernellj954 · 08-23-2011, 02:52 PM

Oh, 2001 EZ-GO TXT.

scottyb · 08-23-2011, 03:08 PM

Swap the 2 cables at the F&R sides
Swap position 9am with 3 pm.

pernellj954 · 08-23-2011, 03:09 PM

Ok....I put it in reverse (no buzzer going off), and pressed on the gas, and it doesn't move. I hear the solenoid click though. When I wired the controller and solenoid, I noticed the diagram I had for the B & D connections on the F&R switch were different. ScottyB sent me the correct diagram, so now I had two with B going to S2 and D going to S1, where 1 diagram had B going to S1 and D going to S2.

scottyb · 08-23-2011, 03:10 PM

Follow the FSIP diagram to the letter.
Hide the ezgo diagram.
LOL

pernellj954 · 08-23-2011, 03:15 PM

lol...it is wired up using the FSIP diagram, I swapped the two from where I had it according to the EZ-GO one. Ha.....oh boy, why me. I'll let you know if a few minutes what happens...if you hear a loud boom from the East Coast, it might be from me. :)

pernellj954 · 08-23-2011, 03:35 PM

Nope. Here's my question: If you are looking down at the F&R switch, is A or C at the bottom, and is B on the left or right?

pernellj954 · 08-23-2011, 03:38 PM

I switched them and the buzzer still goes off in FWD and it doesn't move, same symptoms.

pernellj954 · 08-23-2011, 04:01 PM

I swapped them back to the FSIP instructions, with what I believe is A on the bottom going to B+, B is going to S2, D going to S1, and what I think is C at the top going to A2.

Is A at the bottom and C the top one? If so, I have that correct.

Could I have inverted the Cam shaft upside down? Looking at your HD Switch Cam diagram, my .................WAIT A MINUTE.....I DO have the HD Cam upside down! the silver metal stop lever on the cam is on the top. Whew, easy fix now! Thanks for your help ScottyB!

pernellj954 · 08-23-2011, 04:13 PM

I put that where it should be, now I have a constant beep in FWD. Must be something else.

08-23-2011, 02:52 PM	#1
pernellj954 Gone Wild Join Date: Aug 2011 Location: Chesapeake, VA Posts: 154	HD Cam backwards? buzzer goes off in FWD I've just tightened everything up from going to 48V and I'm wondering if the HD Cam I put in might be turned the wrong way b/c when I try to connect the Neg battery cable, the buzzer is going off, in FWD. Thanks for your help!

08-23-2011, 02:52 PM	#2
pernellj954 Gone Wild Join Date: Aug 2011 Location: Chesapeake, VA Posts: 154	Re: HD Cam backwards? buzzer goes off in FWD Oh, 2001 EZ-GO TXT.

08-23-2011, 03:08 PM	#3
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,410	Re: HD Cam backwards? buzzer goes off in FWD Swap the 2 cables at the F&R sides Swap position 9am with 3 pm.

08-23-2011, 03:09 PM	#4
pernellj954 Gone Wild Join Date: Aug 2011 Location: Chesapeake, VA Posts: 154	Re: HD Cam backwards? buzzer goes off in FWD Ok....I put it in reverse (no buzzer going off), and pressed on the gas, and it doesn't move. I hear the solenoid click though. When I wired the controller and solenoid, I noticed the diagram I had for the B & D connections on the F&R switch were different. ScottyB sent me the correct diagram, so now I had two with B going to S2 and D going to S1, where 1 diagram had B going to S1 and D going to S2.

08-23-2011, 03:10 PM	#5
scottyb Happy Carting Join Date: Dec 2007 Location: Southern California Posts: 73,410	Re: HD Cam backwards? buzzer goes off in FWD Follow the FSIP diagram to the letter. Hide the ezgo diagram. LOL

Today
BGW	Sponsored Links __________________ This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum

08-23-2011, 03:15 PM	#6
pernellj954 Gone Wild Join Date: Aug 2011 Location: Chesapeake, VA Posts: 154	Re: HD Cam backwards? buzzer goes off in FWD lol...it is wired up using the FSIP diagram, I swapped the two from where I had it according to the EZ-GO one. Ha.....oh boy, why me. I'll let you know if a few minutes what happens...if you hear a loud boom from the East Coast, it might be from me. :)

08-23-2011, 03:35 PM	#7
pernellj954 Gone Wild Join Date: Aug 2011 Location: Chesapeake, VA Posts: 154	Re: HD Cam backwards? buzzer goes off in FWD Nope. Here's my question: If you are looking down at the F&R switch, is A or C at the bottom, and is B on the left or right?

08-23-2011, 03:38 PM	#8
pernellj954 Gone Wild Join Date: Aug 2011 Location: Chesapeake, VA Posts: 154	Re: HD Cam backwards? buzzer goes off in FWD I switched them and the buzzer still goes off in FWD and it doesn't move, same symptoms.

08-23-2011, 04:01 PM	#9
pernellj954 Gone Wild Join Date: Aug 2011 Location: Chesapeake, VA Posts: 154	Re: HD Cam backwards? buzzer goes off in FWD I swapped them back to the FSIP instructions, with what I believe is A on the bottom going to B+, B is going to S2, D going to S1, and what I think is C at the top going to A2. Is A at the bottom and C the top one? If so, I have that correct. Could I have inverted the Cam shaft upside down? Looking at your HD Switch Cam diagram, my .................WAIT A MINUTE.....I DO have the HD Cam upside down! the silver metal stop lever on the cam is on the top. Whew, easy fix now! Thanks for your help ScottyB!

08-23-2011, 04:13 PM	#10
pernellj954 Gone Wild Join Date: Aug 2011 Location: Chesapeake, VA Posts: 154	Re: HD Cam backwards? buzzer goes off in FWD I put that where it should be, now I have a constant beep in FWD. Must be something else.

Similar Threads
Thread	Forum
can a 440 run backwards?	Gas EZGO
91TXT steers backwards	Gas EZGO
04 pds will go backwards but not forward ???	Electric EZGO
Move rear end backwards ????????	Gas Yamaha
ez go f/r backwards	Electric EZGO