I can't stand it any longer !Time to upgrade my Precedent

[cmarinman]

FYI with the executioner motor from Plum Quick I lost a bunch of range 40%. I am sure the assasin motor would be even worse. Anyone know how to get some of that range back without changing to 8 volt batteries. I guess this is the price you pay for speed. Thanks

[JcXtreme72]

Buy a military twin cylinder diesel generator and put it on a trailer to tow and run it while charging?

[eaglesdad1]

Originally Posted by cmarinman

FYI with the executioner motor from Plum Quick I lost a bunch of range 40%. I am sure the assasin motor would be even worse. Anyone know how to get some of that range back without changing to 8 volt batteries. I guess this is the price you pay for speed. Thanks

So you lost a bunch of range 40% , How old are your batterys ?

[cmarinman]

12-11 Trojan batteries. Follow your thread back to my proir quotes. I was thinking of going solar roof to get some range back. Note stock controller on cart.

[mtwain69]

you wont get much with solar

[eaglesdad1]

Well over the past few days I have been able to work on the cart for an hour or so each night after work.Jakes Long travel lift and wheels are done, Man I love the way this thing looks And the ride is amazing, very smooth !
Next I installed the Alltrax 600 amp controller and super duty solenoid with new 2 gauge cables. Special thats to Scotty B for all his help Finished up the battery cables after work today and my son said come on dad lets try this beast out ! Well I had to agree and all I can say is WOW ! My wife came out on the deck and said you do know every time you take off the wheels are off the ground ! I looked at her with a big grin and said yeah I know still have some tuning to do to the controller, It want to jurk on take off and I have to push the pedal about half way down before it will move. So I am guessing I need to ajust the controller ???? Over all so far I am very happy with what we have done. Now its time for a motor ! Ken

[eaglesdad1]

a few pictures

[Chipster27]

Cart looks great!

[lgbarne]

Originally Posted by eaglesdad1

It want to jurk on take off and I have to push the pedal about half way down before it will move. So I am guessing I need to ajust the controller ???? Ken

Be careful about changing the throttle curve via the controller pro software. If it currently shows "Custom" it likely is using a curve that accounts for a known issue where CC Precedent MCORs don't consistently send 100% throttle when you have it to the floor. This will not allow Turbo Mode to kick in and youll lose about 2 MPH. I had this happen to me because I thought the custom curve was too jerky, so I changed it to linear that seemed smoother. If you change the setting youll have to reinstall the custom curve file to get it back. The only other option to the jerking is to lower the throttle up rate, but that'll likely eliminate wheelies

[lgbarne]

By the way - it appears your front tire track is now ALOT WIDER

Suppose that'll keep you better planted in curves!