|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-04-2013, 11:06 AM | #1 |
Not Yet Wild
Join Date: May 2013
Posts: 2
|
2010 RXV how to adjust valves
I have a RXV with the 13hp engine that I think needs to have the valves adjusted. I need help on how to adjust valves and what setting to use (.006?).
Thanks for any help |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-06-2013, 10:14 PM | #2 |
Not Yet Wild
Join Date: Jan 2010
Location: tn
Posts: 25
|
Re: 2010 RXV how to adjust valves
Manual said 004-006 thousands for exhaust and intake valve. You take the valve cover off set the engine at top dead center of the compression stoke by turning the engine over by hand by turning the drive clutch. You can tell you are on top dead center of compression stroke by removing spark plug and using a flash light get the piston on top of stroke. If its on compression stroke the valve tappets will move up and down a little. just loosen the lock nuts and turn set screws until gap is snug on feeler gauge between tappet and valve. You might want to order a valve cover gasket first because it is paper and will tear when you remove valve cover. Hope this helps you out a little.
|
05-10-2013, 06:32 PM | #3 |
Not Yet Wild
Join Date: May 2013
Posts: 2
|
Re: 2010 RXV how to adjust valves
Jeff, Thank for the information. That is the same settings I use on my 2001 gas cart.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
honda 24 valves adjust | Big Block Talk! | |||
how to adjust valves on a v-twin HELP | Big Block Talk! | |||
How to adjust valves on 13hp kawasaki | Gas EZGO | |||
How do u adjust the valves G9 | Gas Yamaha | |||
Is it nessesory to Adjust valves on a 2002 carryall 272? | Gas Club Car |