PQ Bandit on DS IQ

[davet]

Did a little reading on the PQ site this morning,have a 2007 DS IQ,new batts and 4 gauge.Want some more speed without going nuts.From what I understand the magnet change is not an option for a GE motor.Does the Bandit modifications include the high speed magnet ?Anyone who has done this,how much of an improvement can I expect with a stock controller ?The motor they listed covered early regens but not later IQ's.Thanx Dave

[CartTrader]

From my understanding ...Yes...the PQ motors include a modified magnet change along with wiring changes. BUT yes the magnets can be changed on the GE motors as long as you have the sepex GE motor. They are a bit harder to change but can be done. I did it in my 2003 DS IQ with the GE motor.

CartTrader

[anix]

Mines not an IQ cart but it is a regen power drive II and I just hung a PQ Executioner on it with a stock controller and 22" tires do not know the final out come but I think it will be pretty good. I will know more late this afternoon or tomorrow.

[eagant5]

Look into a speedy link. My 03 IQ runs 23-24mph all day with that being the only modification besides for 23" tires.

[jakesnake27]

Originally Posted by eagant5

Look into a speedy link. My 03 IQ runs 23-24mph all day with that being the only modification besides for 23" tires.

Speedylink is supposedly supposed to get you the same speed as code 4. Eagant, do you have code 4 also installed?
I wonder what only speed code 4 on your cart would bring?

[eagant5]

Originally Posted by jakesnake27

Speedylink is supposedly supposed to get you the same speed as code 4. Eagant, do you have code 4 also installed?
I wonder what only speed code 4 on your cart would bring?

No, the cart is still on the factory speed setting. It would run 12mph before I installed the speedy link. I have seen 26mph before out of the cart. And this was all on a weak battery pack.

[anix]

Sure be worth a try CT. Be a lot cheaper than what I did. I would have tried it but mine is not an IQ cart.

[davet]

You guys are on it,the motor on this cart is noisy so thats why I was thinking Bandit,On the EX motor it's listed for the early regens but not for the IQ.Am I correct in thinking only a CC dealer can put in speed code 4 ??Dave

[davet]

Anix,the cart in my avatar is a 2000 regen II,D&D motor,Alltrax,changed over to a PB-6 throttle and all I can get from it is 29 mph.The motor caused a choppy throttle action,the alltrax helped it but the pb-6 cured it.Mine was a 15k-0 multi step box,not a mcor throttle...Dave good luck

[pete959]

dealers cant even do step 4 way i understand it is that the controller gets sent back to cc and then they tell the dealer the coded pw to unlock step 4 for ur controller but that could be a old wives tale