|
|
|||||||
| Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
  |
|
|
Thread Tools | Display Modes |
07-08-2013, 01:22 PM
|
#1 |
|
Getting Wild
Join Date: Nov 2012
Location: Springboro, OH
Posts: 87
|
G14 Governor
I read the Governor Bypass Sticky, but I have a G14. My kids run around the property on the cart all the time, so I don't think I want to go straight to the carb with the throttle cable. They'll blow it up for sure! However, I would like to figure out how to make it go as fast as possible with the governor still on. The sticky talks about turning down a 10mm bolt, but I don't see it. I'm thinking the whole stootin match is under my muffler, but don't know. Anyone know where this screw is on a G14? Thanks for the help...
|
|
|
 Today
|
|
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
07-08-2013, 01:29 PM
|
#2 |
|
Not Yet Wild
Join Date: Aug 2011
Posts: 44
|
Re: G14 Governor
Yes it is located directly under your muffler. Get a deep well 10mm socket and tighten the nut up. It will have one cable attached to each side of the bracket
|
|
|
|
|
07-08-2013, 01:48 PM
|
#3 |
|
Getting Wild
Join Date: Nov 2012
Location: Springboro, OH
Posts: 87
|
Re: G14 Governor
Did you do this? How much of a difference did it make?
|
|
|
|
|
07-08-2013, 08:40 PM
|
#4 |
|
Getting Wild
Join Date: Nov 2012
Location: Springboro, OH
Posts: 87
|
Re: G14 Governor
Screwed it all the way in. HUGE difference. It is like a completely different kart. Thanks for the input. It may get faster if I bypassed the governor completely, but with the lift and the kids driving it, it is plenty fast now. If it was just me, it would be different... Thanks again...
|
|
|
|
|
07-10-2013, 12:04 PM
|
#5 |
|
Not Yet Wild
Join Date: May 2013
Posts: 3
|
Re: G14 Governor
is anyone able to show where this is in a picture? I want to do this when I get home today.
|
|
|
|
|
07-10-2013, 08:38 PM
|
#6 |
|
G8 Specialist
Join Date: Jun 2009
Location: Phoenix
Posts: 7,799
|
Re: G14 Governor
Merk, directly on top of the transmission. Throttle cable goes to it.
|
|
|
|
|
07-10-2013, 09:55 PM
|
#7 |
|
Not Yet Wild
Join Date: May 2013
Posts: 3
|
Re: G14 Governor
ty mike.
|
|
|
|
|
07-11-2013, 09:04 PM
|
#8 |
|
Getting Wild
Join Date: Nov 2012
Location: Springboro, OH
Posts: 87
|
Re: G14 Governor
So, did you do it? Mine is like a different cart. Going to add fender flares and seat cover, then I'm done. Both are ordered and on the way...
|
|
|
|
|
03-28-2022, 09:22 AM
|
#9 |
|
Not Yet Wild
Join Date: Mar 2022
Posts: 1
|
Re: G14 Governor
Thanks for the tip, I will try it and post a photo shortly.
 |
|
|
|
|
06-17-2023, 09:03 AM
|
#10 |
|
Not Yet Wild
Join Date: Jun 2023
Location: Massena, NY
Posts: 44
|
Re: G14 Governor
I am going to do this right now. Thank you the info. A picture would be great to see the location for sure.
|
|
|
|
|
|
||||||
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| 94 governor | Gas Club Car | |||
| G1 governor help | Gas Yamaha | |||
| governor help | Gas Yamaha | |||
| 88 ez go governor | Gas EZGO | |||
| governor | Gas Club Car | |||
Linear Mode
