|
Gas Yamaha Gas Yamaha Golf Cars; G1 through "The Drive" and U-Max Utility Vehicles |
|
Thread Tools | Display Modes |
07-10-2013, 12:00 AM | #1 |
Not Yet Wild
Join Date: Jun 2013
Posts: 4
|
What mounts do I use for my G2 with a GX390?
I Just bought a Honda GX390 & I'm thinking about putting it in my G2 that needs a crank. What are people using to mount this engine in the cart & where do you get it? I have the rest figured out I think.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
07-10-2013, 08:26 PM | #2 |
Vegas modded 420
Join Date: Jun 2009
Location: West MI
Posts: 15,445
|
Re: What mounts do I use for my G2 with a GX390?
Some use a gokart mount plate. I welded up a mount out of a little piece of 1.5" square tubing and two pieces of 1.25"x 5/16 bar and another with 3/8 x 2" bar or similar. I lined up the clutches and marked the holes, drilled, bolted engine on. The gokart plate has the holes in it. The square tube was used in the front to lower the engine there due to my lift, that way the engine is close to level instead of tilted. Take a look in the clones section under bigblocks.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Best Carbs for GX390 | Clone Engine Swaps | |||
gx390 shutting down | Clone Engine Swaps | |||
help with gx390 | Lifted Golf Carts | |||
GX390 runs hot, | Big Block Talk! | |||
Question about a GX390 | Big Block Talk! |