|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
|
01-10-2009, 05:20 PM | #1 |
Not Yet Wild
Join Date: Aug 2008
Posts: 8
|
ez go front cowl cap removal
I have a 92 electric ez go with cracked front cowl cap. Can anybody tell me how to remove it
|
01-10-2009, 05:52 PM | #2 |
Gone Wild
Join Date: Jan 2008
Location: Covington, TN
Posts: 1,942
|
Re: ez go front cowl cap removal
Welcome to BGW!
|
01-10-2009, 07:08 PM | #3 |
Golf Cart Photographer
Join Date: Jan 2007
Location: Wichita Falls Texas - My Ride 2010 Club Car
Posts: 6,236
|
Re: ez go front cowl cap removal
Welcome to the forum jmorrisonva1..............
Please post some photos so we will know exactly what you are talking about, as well as the serial number so we can confirm the year. |
01-10-2009, 08:04 PM | #4 |
Not Yet Wild
Join Date: Aug 2008
Posts: 8
|
Re: ez go front cowl cap removal
Thanks for the reply. The manufacture code is 63092. It is a black plastic piece with the ez go nameplate on it that attaches to the front cowl. Will send a picture once I figure out how to do it.
|
01-10-2009, 08:29 PM | #5 |
TOD WILD
Join Date: Nov 2007
Location: YUMA AZ
Posts: 666
|
Re: ez go front cowl cap removal
There's a whole bunch of 1/4" bolts holding this piece on in the glove
box there is a plastic tray that has to come out to give access to these bolts its been a while since I did one I think the cup holder needs to come off as well this job is a lot easier with 2 peoples....Good Luck!!! |
01-10-2009, 09:12 PM | #6 |
steeplejack x
Join Date: Jan 2007
Location: Republic of Texas
Posts: 3,382
|
Re: ez go front cowl cap removal
The front plastic cowl with or without headlight cutouts just unbolts from the metal front clip. Is that what you are asking?
|
01-12-2009, 02:57 PM | #7 |
Not Yet Wild
Join Date: Aug 2008
Posts: 8
|
Re: ez go front cowl cap removal
Thanks for the information. It worked fine. I would never have figured that you had to do this to get that cowl cap off. Thanks again.
|
07-30-2017, 07:33 PM | #8 |
Not Yet Wild
Join Date: Jul 2017
Posts: 10
|
Re: ez go front cowl cap removal
Is there a specific rivet (or size rivet) necessary when putting the cowl back on? I'm starting a rebuild and I'm not sure...
|
07-30-2017, 08:16 PM | #9 |
Gone Wild
Join Date: Sep 2016
Location: Northern California
Posts: 1,300
|
Re: ez go front cowl cap removal
Jump, if you're doing a whole rebuild, just order the rivet package. If you search, you can find where someone has listed the sizes and amounts, but it's cheap and easier to just order the package.
Oh, and start your own threads. It'll be more helpful. |
|
|
Similar Threads | ||||
Thread | Forum | |||
G-9 front cowl | Golf Carts and Parts | |||
Front cowl | Gas EZGO | |||
front cowl for G1 | Gas Yamaha | |||
Looking for used front cowl | Golf Carts and Parts | |||
Looking for a EZ GO ST Front Cowl | Gas EZGO |