![]() |
|
Gas Club Car Gas DS, and Precedent golf cars |
![]() ![]() |
|
Thread Tools | Display Modes |
|
![]() |
#1 |
Gone Wild
Join Date: Apr 2009
Posts: 312
|
![]() 1997 CC DS...starter/generator belt squealing like a pig when try to start and is so loose it 's wavering...I can't seem to get a lever under it to pry it up to tighten enough...any tricks to this? Thanks!
|
![]() |
![]() |
![]() |
#2 |
Nincompoop village idiot
![]() ![]() Join Date: Apr 2018
Location: Michigan
Posts: 9,845
|
![]() I stick a pry bar under the gen but on top of the bracket and gently nudge it up. It needs to be tight, but not over tight or it will wreck the bearing.
Helps to loosen the 2 bolts in the front of it too. |
![]() |
![]() |
![]() |
#3 |
Not Yet Wild
![]() Join Date: Aug 2017
Location: Lake Worth, Florida
Posts: 11
|
![]() I take a ratcheting tie-down strap, loop it around the starter and the metal seat frame assembly, then ratchet it up until the belt is the desired tension. Tighten the adjustment bolt and the two mounting bolts, then release the tie-down.
|
![]() |
![]() |
![]() |
#4 | |
Photoshop Guy
![]() Join Date: Aug 2012
Location: Canal Fulton, OH
Posts: 3,955
|
![]() Quote:
![]() |
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Cart dieseling after belt tightening? Precedent 2013 | Gas Club Car | |||
Tips on Starter/Generator Adjustment? | Gas EZGO | |||
Tightening of motor electric studs | Electric Club Car | |||
Slipping Starter motor belt | Clone Engine Swaps | |||
tightening the starter/generator belt on flathead | Gas Club Car |