![]() |
|
Electric Club Car Electric DS, and Precedent golf cars |
|
Thread Tools | Display Modes |
![]() |
#1 |
Not Yet Wild
![]() ![]() Join Date: Apr 2016
Location: Newark, MD
Posts: 18
|
![]() Hello I was reading an old post explaining how the tightening the solenoid studs is the same as the tightening of the motor studs - I totally understand the double wrench system for the terminal but on my motor I noticed the nuts that tighten the stud itself to the motor body were not really good and tight, so I "snugged" them and then double wrench tightened the terminals - is over tightening the stud nut to the body or brushes as critical as the solenoid stud tightening ? Thanks, Mike (hopefully be new this question is allowed)
|
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
Identify CC motor studs | Electric Club Car | |||
1987 EZGO Marathon motor studs broke | Electric EZGO | |||
need longer wheel studs to mount 12 inch custom wheels on93 model yamaha g8 electric | Electric Yamaha | |||
Identifying motor studs | Electric Club Car | |||
Stripped Motor studs | Electric EZGO |