Curtis hand held programmer

[Den59]

Does anybody know we're I can buy a used Curtis 1311 hand held programmer. I bought a new Curtis 1268 500 amp controller for my EZGO CART and I want to program the controller, but they don't make the 1311 any more. I guess I can get the 1313 but I need the 4 pin square plug to plug into the controller.

[glassk]

http://www.electricmotorsport.com/cu...rogrammer.html

Curtis 1311-4401 OEM Handheld Programmer

[txpres]

Make sure you get the right 1313 programmer. The -4401 is the OEM programmer which I believe has the most functions and is the most expensive. There is also a -3301 Dealer Programmer, a -2201 Service Programmer, and a -1101 User Programmer. The Dealer, Service and User devices have progressively less functional ability and cost less. The 4 pin connector cable is sometimes sold as a separate item.

[Den59]

I bought this 1313-4401 hand held programmer, but when I plug it in and turn on the key it says programmer doesn't detect system? Does anybody have an idea what's wrong? It obvously is reading something when I plud it in the screen turns on

[glassk]

If the controller is not turned on when the programmer is connected, you can
power up the programmer by pressing the Power key; the message “No System
detected” will be displayed.

[Den59]

I turned the key on, put the switch in run. The programmer does not detect the system. Is there something else to do to power up the Controler. I know when I program the Altrax controller on another cart I had to disconnect the batteries and just put 18v to one of the terminals. But I can't find anything on the Curtis controllers like the info that is out there for the altrax

[Den59]

Is there a Logic Circuit Enable switch available on the Curtis 1268-5508