![]() |
![]() |
#1 |
Getting Wild
![]() Join Date: Sep 2010
Location: Plymouth, NH
Posts: 85
|
![]() it seems like atleast once a month i'm putting a new head gasket in. i've tried them with gasket maker, with out, everythings torqued right. I just don't understand why i keep breaking them. Its always at random times too, month or so ago it was just when i fired her up and last week it was after i had been running it for an hour, any ideas?
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Gone Wild
![]() Join Date: Jul 2010
Location: s/w pa
Posts: 364
|
![]() what engine ?
rusty s |
![]() |
![]() |
![]() |
#3 |
Getting Wild
![]() Join Date: Sep 2010
Location: Plymouth, NH
Posts: 85
|
![]() 244 2 stroke
|
![]() |
![]() |
![]() |
#4 |
no clue
![]() ![]() Join Date: Sep 2009
Location: spicewood, texas
Posts: 3,308
|
![]() sounds like the head maybe warped, or the cylinder. i would check these to be sure they are flat. does it blow out in the same area each time? if it does that might show where you have a low spot.
|
![]() |
![]() |
![]() |
#5 |
Gone Wild
Join Date: Feb 2011
Posts: 1,518
|
![]() My try next time heads off get a piece of glass tempered and put emery paper flat sand head at 45 deg angles until it shows its flat.Cheap way of machining an aluminum head.
MORE TIME THAN MONEY ![]() |
![]() |
![]() |
![]() |
#6 |
Gone Wild
![]() Join Date: Jul 2010
Location: s/w pa
Posts: 364
|
![]() thats my guess to warped something !
rusty s |
![]() |
![]() |
![]() |
#7 |
Gone Wild
Join Date: Feb 2011
Posts: 1,518
|
![]() Rusty just done it on mine to find out in fact it was not flat. Better to check before than after.
![]() |
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
EZGO 2stroke Head Gasket Repair | Gas EZGO | |||
Bent head gasket in mail | Gas EZGO | |||
g1 exh. gasket | Gas Yamaha | |||
gasket 98 - 2 stroke | Gas EZGO | |||
head gasket help | Gas EZGO |