![]() |
|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
![]() ![]() |
|
Thread Tools | Display Modes |
![]() |
#1 |
Not Yet Wild
Join Date: Apr 2012
Posts: 43
|
![]() Got a big problem now. I was in the process of replacing the stock cables on my 95 medalist with some bigger 2ga ones. When I was trying to remove the old cables from the motor, which were rusted pretty bad, I spun one of the studs. Heard it click on the inside and now it just spins freely. Is there any easy fix for this without taking the motor apart from the diff?
|
![]() |
![]() |
![]() |
|
![]() __________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
![]() |
#2 |
Happy Carting
![]() ![]() Join Date: Dec 2007
Location: Southern California
Posts: 73,978
|
![]() No. Take the motor off and see what broke, you might be able to solder the connection back on.
Always use 2 wrenches on the motor studs. the bottom nut keeps the stud from spinning. |
![]() |
![]() |
![]() |
#3 |
Not Yet Wild
Join Date: Apr 2012
Posts: 43
|
![]() If it cannot be soldered back on what are my options? I was just looking at the bandit motors from plum quick. Seems like a good price for the upgrade.
|
![]() |
![]() |
![]() |
#4 |
Happy Carting
![]() ![]() Join Date: Dec 2007
Location: Southern California
Posts: 73,978
|
![]() Any electric motor shop can fix it.
|
![]() |
![]() |
![]() |
#5 |
Not Yet Wild
Join Date: Apr 2012
Posts: 43
|
![]() Called a local electric motor company and they said the last one like that they fixed cost $400 to do. I was thinking more like $50. Looks like I'll be getting that plum quick bandit.
|
![]() |
![]() |
![]() |
#6 |
Getting Wild
![]() Join Date: Apr 2012
Location: Dallas Texas
Posts: 132
|
![]() |
![]() |
![]() |
![]() |
#7 |
Not Yet Wild
Join Date: Apr 2012
Posts: 43
|
![]() I for some reason just noticed that plum quick motors only advertised for club cars. Guess I was just hoping instead of reading. Any other aftermarket motor to go with. Cart is stock 36v now but in the process of 48V and motor swap for a hunting cart. Looking for pure torque and pulling power. 12mph is fine. speed is no consern.
|
![]() |
![]() |
![]() |
#8 |
Happy Carting
![]() ![]() Join Date: Dec 2007
Location: Southern California
Posts: 73,978
|
![]() Call another repair shop, that is ridiculous estimate.
|
![]() |
![]() |
![]() |
#9 |
Getting Wild
![]() Join Date: Apr 2012
Location: Dallas Texas
Posts: 132
|
![]() ![]() |
![]() |
![]() |
![]() |
#10 | |
Techno-Nerd
![]() ![]() Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
![]() Quote:
(Actually, golf cart manufacturers more or less use off the shelf motors and Plum Quick does their magic on motors made by several motor manufactures, so they have motors for just about all carts) |
|
![]() |
![]() |
![]() |
|
Thread Tools | |
Display Modes | |
|
![]() |
||||
Thread | Forum | |||
What studs are what?!?! | Electric Club Car | |||
Diff studs | Gas Yamaha | |||
Lug Studs | Electric Yamaha | |||
rear lug studs | Gas Club Car | |||
Stripped out studs on FNR assemble | Electric EZGO |