|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
09-24-2010, 08:57 AM | #1 |
Not Yet Wild
Join Date: Sep 2010
Location: Lenexa, KS
Posts: 26
|
New D&D Torque Motor (4:1) - Not Seeing 40% Torque
I have a 2006 EZGO TXT Series cart with the 4ga upgrade and now a new D&D Electric Motor (4:1 - described as 40% more torque with stock controller and 36v). My neighborhood is full of hills and we use the cart to take our kids to the bus stop and goof off around our neighborhood.
After adding the motor, I was expecting to see a little more power and speed going up our hills than I am actually seeing. Am I expecting too much from a golf cart? Do I need to continue down the path adding a 500amp controller? What is 40% more torque suppose to deliver if not pull up a hill at higher speed than 2-3 mph. |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
09-25-2010, 12:17 AM | #2 |
Gone Wild
Join Date: Oct 2007
Location: Snellville, Ga.
Posts: 1,304
|
Re: New D&D Torque Motor (4:1) - Not Seeing 40% Torque
have you checked the condition of your batteries?
|
09-25-2010, 07:42 AM | #3 |
Not Yet Wild
Join Date: Sep 2010
Location: Lenexa, KS
Posts: 26
|
Re: New D&D Torque Motor (4:1) - Not Seeing 40% Torque
Batteries were replaced about a year ago, water levels are good. I always charge after we use it. I installed a battery gauge and it reads full during my tests.
|
09-25-2010, 08:21 AM | #4 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,419
|
Re: New D&D Torque Motor (4:1) - Not Seeing 40% Torque
Yes, a bigger controller like the 480 LGS or 500 Alltrax will wake that motor up. Right now, it is limited by the stock controller only allowing 275a at any time.
|
09-26-2010, 01:10 PM | #5 | |
Gone Wild
Join Date: Jun 2010
Location: Central Florida
Posts: 2,757
|
Re: New D&D Torque Motor (4:1) - Not Seeing 40% Torque
Quote:
|
|
09-26-2010, 08:07 PM | #6 |
Not Yet Wild
Join Date: Sep 2010
Location: Lenexa, KS
Posts: 26
|
Re: New D&D Torque Motor (4:1) - Not Seeing 40% Torque
So if I get a 500 amp controller, what else will I have to replace because of the higher amps gaining through the system?
|
09-26-2010, 08:18 PM | #7 |
Stay thirsty my friends!
Join Date: Jan 2007
Location: Suburban Chicago
Posts: 24,292
|
Re: New D&D Torque Motor (4:1) - Not Seeing 40% Torque
The solenoid.
|
09-26-2010, 10:46 PM | #8 | |
Gone Wild
Join Date: Mar 2010
Location: Mountaindale, Oregon
Posts: 303
|
Re: New D&D Torque Motor (4:1) - Not Seeing 40% Torque
Quote:
|
|
10-06-2010, 09:48 PM | #9 |
Not Yet Wild
Join Date: Sep 2010
Location: Lenexa, KS
Posts: 26
|
Re: New D&D Torque Motor (4:1) - Not Seeing 40% Torque
I put in an AllTrax 400amp controller (AXE4845) and I am still not seeing any improvements up hills. At 400 amps, do I need to replace the Solenoid and if so, why? On the D&D website, it says my current setup should be :
Vehicle Speed: 12 mph Torque Enhancement: + 60 % Motor RPM: 2780 Peak HP: 8 When I go up hills, someone could still walk next to the cart and keep up. My wife is probably not going to let me do much else under-the-seat unless I will actually see a difference. |
10-06-2010, 11:46 PM | #10 |
Gone Wild
Join Date: Oct 2007
Location: Snellville, Ga.
Posts: 1,304
|
Re: New D&D Torque Motor (4:1) - Not Seeing 40% Torque
Do the 48v upgrade. That will give you the best use of your motor. 48v will give more speed too.
|
Tags |
d&d, ezgo, torque, txt |
|
|
Similar Threads | ||||
Thread | Forum | |||
Which High Torque Motor | Extreme DC! | |||
G16 Motor Bolt Torque | Gas Yamaha | |||
Torque Motor | Golf Carts and Parts | |||
Torque Motor | Golf Carts and Parts | |||
What's the best High Torque motor? | Extreme DC! |