02-16-2013, 11:32 AM | #1 |
Not Yet Wild
Join Date: Dec 2012
Location: windsor.Ontario
Posts: 13
|
primary shaft size
have a ezgo 1999 want to put new clutch on will all comet clutch be aright they talk about a 30 mm is that what i have.thx jeff
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-16-2013, 01:32 PM | #2 |
Not Yet Wild
Join Date: Dec 2012
Location: windsor.Ontario
Posts: 13
|
Re: primary shaft size
ok will a 108exp 30 mm tapered new comet clutch fit on my ezgo 1999 anyone thx jeff
|
02-16-2013, 07:21 PM | #3 |
Gone Wild
Join Date: Sep 2012
Location: Michigan
Posts: 351
|
Re: primary shaft size
What happened to your clutch??
|
02-17-2013, 06:14 AM | #4 |
Not Yet Wild
Join Date: Dec 2012
Location: windsor.Ontario
Posts: 13
|
Re: primary shaft size
well was going buy a rebuild kit for it but i can buy 108exp just want to know if i can put this clutch on this old shaft because i still need to run my starter belt
|
02-17-2013, 06:43 AM | #5 |
Gone Wild
Join Date: Sep 2012
Location: Michigan
Posts: 351
|
Re: primary shaft size
Im not sure about the clutch fitment, Im sure someone will amswer soon
|
02-17-2013, 08:39 AM | #6 |
Gone Wild
Join Date: Apr 2012
Location: Dansville, NY
Posts: 396
|
Re: primary shaft size
It will fit, same taper.
|
02-17-2013, 09:11 AM | #7 |
Not Yet Wild
Join Date: Dec 2012
Location: windsor.Ontario
Posts: 13
|
Re: primary shaft size
so if i remove my spider from the old 1 the 108exp will screw right on or do i have to get my starter pulley off an put it on the new clutch because this 108exp doesn"t have a starter pulley on it
|
02-17-2013, 12:55 PM | #8 |
Gone Wild
Join Date: Apr 2012
Location: Dansville, NY
Posts: 396
|
Re: primary shaft size
The 108 clutch will fit your shaft but the inner sheave and shaft from the stock clutch will not fit the 108, been there.
|
02-17-2013, 01:14 PM | #9 |
Not Yet Wild
Join Date: Dec 2012
Location: windsor.Ontario
Posts: 13
|
Re: primary shaft size
so your saying that my stock inner is the starter pulley is to small for 108exp thx sorry guy jeff
|
02-17-2013, 01:49 PM | #10 |
Not Yet Wild
Join Date: Dec 2012
Location: windsor.Ontario
Posts: 13
|
Re: primary shaft size
so i guess i"m to plan b just ordering replacement comet part from royal distrutor thx guys so no upgrades to clutches
|
|
|
Similar Threads | ||||
Thread | Forum | |||
primary clutch bolt size | Gas Yamaha | |||
Shaft size on an 01 club car? | Big Block Talk! | |||
shaft size ? | Big Block Talk! | |||
What size thread for Primary Puller Bolt? | Gas Yamaha | |||
FE290 shaft size | Gas Club Car |