08-30-2011, 10:27 PM | #1 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
G2 Lift Project
Hey Guys,This is a G2 that I just did for my Brother-In-Law.It went good,and I've got the quirks figured out.Its' a 7" lift,5" additional track-width.I used 400EX shocks up front and relocated the stock rears.He added 3" bolt-on spacers in the rear and 22x11x8" Trail-Pros on the stock wheels.I finished fabbing it Wednesday,Saturday I got to pound it thru the woods and some mud.All went well.Just thought I'd share some pics.And Yes,Those are my "Helper-Elves"
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
08-30-2011, 10:56 PM | #2 |
Member 23082
Join Date: Mar 2010
Location: Spokane Washington
Posts: 1,169
|
Re: G2 Lift Project
Mike,
That lift looks great!!! and thanks for all the help. OT |
08-31-2011, 01:51 PM | #3 |
Admin/Moderator
Join Date: Dec 2006
Location: Ohio
Posts: 18,055
|
Re: G2 Lift Project
Nice work!
|
Ron
PLEASE VISIT Our Sponsors * BGW GEAR The Store The G2 Project * Swing Arm Drop & Repair * Geep1 Project |
|
09-06-2011, 07:53 PM | #4 |
Getting Wild
Join Date: Jul 2011
Posts: 88
|
Re: G2 Lift Project
Nice
|
09-06-2011, 08:46 PM | #5 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: G2 Lift Project
Thanks Guys!My wife gets her G16 done next,and my boss wants his G2 done.At least one will be a paying job!
|
09-06-2011, 09:48 PM | #6 |
Getting Wild
Join Date: Jul 2011
Posts: 88
|
Re: G2 Lift Project
All homemade?
|
09-07-2011, 06:35 PM | #7 |
rifter
Join Date: Nov 2007
Location: Orlando Florida
Posts: 4,055
|
Re: G2 Lift Project
Nice fab work!
|
09-07-2011, 10:06 PM | #8 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: G2 Lift Project
Yes,Kid,I built everything except for the actual hitch-tube,but I usually make them too(until they became so cheap its' sick).I'll build almost anything(almost!!).And Thanks,Glad you guys like it
|
09-10-2011, 08:53 PM | #9 |
Gone Wild
Join Date: Jan 2011
Location: Las Vegas, Nevada
Posts: 1,942
|
Re: G2 Lift Project
What did you do for steering?
|
09-10-2011, 09:30 PM | #10 |
I Refuse To Get Stuck!!!
Join Date: Jun 2010
Location: Hilton,NY
Posts: 5,427
|
Re: G2 Lift Project
I extended the tie-rods and built risers for the steering-arms.I'm going to make new duplicates of the stock arms out of 3/8 or 1/2" for the next one if I do it the same way,as they flex a little even with a gusset.I may just build a one-piece arm,not sure yet.I'll update as I go.
|
|
|
Similar Threads | ||||
Thread | Forum | |||
my 92 cc ds winter Z-lift project | Lifted Golf Carts | |||
Mystery cart first lift/ cart project | Lifted Golf Carts | |||
Precedent lift project (wish list stage).... | Lifted Golf Carts | |||
G16 12 inch lift Project | Lifted Golf Carts | |||
Club Car Project Big Lift Big Tires Moto Work Help Please | Gas Club Car |