|
Electric golf carts Harley Davidson, Melex, Pargo, Taylor-Dunn and other Misc. Carts. |
|
Thread Tools | Display Modes |
05-15-2018, 08:04 AM | #1 |
Not Yet Wild
Join Date: Mar 2016
Posts: 50
|
Controller issues
My Ruff and Tuff 48 Volt cart was running great until I took the controller cover off to look around. The orange and the black wire were connected by a connector (don’t know why the person before me had to splice them together). Anyhow I took the wires apart stupidly. Now after putting the wires back together the cart will not go. However if I touch little black wire that goes in to the connector to the metal on the cart then it will run, but when I let go the cart stops. The orange wire seems to be connected to somewhere under the Go Pedal. If the orange wire is connect or not it does matter as long as I touch the little black wire that WAS connected to the orange wire is touching the metal frame.Any idea why this is?
Sent from my iPhone using Tapatalk |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Controller issues | Electric EZGO | |||
Controller and solenoid issues | Electric EZGO | |||
Issues after controller upgrade | Electric EZGO | |||
06 Controller issues | Electric EZGO | |||
Issues with controller install | Electric EZGO |