Help ezgo not moving

[Petergriffin]

Solenoid clicks both directions. They all read 0 again and when i pushed gas it would go up then come back down to 0.

[scottyb]

Originally Posted by Petergriffin

Solenoid clicks both directions. They all read 0 again and when i pushed gas it would go up then come back down to 0.

They? They read 0 what?

[Petergriffin]

Well when i have it on the contunity setting on multimeter and check the 4 different ways on the FR switch. Each test had a solid beep from meter but the number read 0 for all 4 tests. I thought thats what you wanted me to test again?

[scottyb]

So no difference when the cart was in gear foot on the go?
I'm lost. Maybe I missed a big clue.

When did this happen?

[Petergriffin]

I just dont know anymore. Maybe ill just get a cheap solenoid and hope for the best. Atleast rule that out.

[yamahaguy97]

Originally Posted by scottyb

So no difference when the cart was in gear foot on the go?
I'm lost. Maybe I missed a big clue.

When did this happen?

lol I think he is saying he checked either the 4 posts on the solenoid, or four points on the F/R switch with his meter

[Petergriffin]

Yes checked 4 points on FR SWITCH, which was last thing told to check.

[scottyb]

The solenoid is easier to test than the F&R. simply put both big cables on the same post. This eliminates the solenoid. If the cart runs then replace the solenoid as it was clicking but not passing current.

My gut feeling is a bad F&R or a bad cable. Twist and pull every cable end to see if one of the 26 ends is loose.

[Petergriffin]

Well i had a cable layin around and tried cart didnt move but someone else said that doesnt completely rule it out so i ordered one should be here a couple days. When installing, are the posts labeled or does it matter which one they go back on. Of course cables that come off big post go back to big post and small back to small. Thanks for your time.

[scottyb]

Originally Posted by Petergriffin

Well i had a cable layin around and tried cart didnt move but someone else said that doesnt completely rule it out so i ordered one should be here a couple days. When installing, are the posts labeled or does it matter which one they go back on. Of course cables that come off big post go back to big post and small back to small. Thanks for your time.

As I said putting both big cables on the same post eliminates the solenoid (switch)from the system. If you put a battery cable from the 2 big posts you did the same thing..... you eliminated the solenoid and the cart did not run virtually guaranteeing the solenoid is NOT the problem - keep us posted.