|
Gas EZGO Gas EZGO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
02-02-2012, 05:28 PM | #1 |
Gone Wild
Join Date: Jan 2012
Location: Kansas City, Mo
Posts: 544
|
Can the Drive Belt tension be adjusted
Hi Everyone, Dumb ? time. Can I adjust the tension on my drive belt on a 96 txt. It's a pretty new belt has less than 1 season on it but it seems really loose I think the previous owner might have put the wrong length on it but I'm not sure how to check. When the engine is off I have 3/4" to 1" space between the belt and the shaft on the front pulley it takes about half to three quarters of the throttle before it even engages to start moving I have great top speed but the torque and low end is terrible at best.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
02-02-2012, 05:49 PM | #2 |
Not your usual outlaw
Join Date: Oct 2008
Location: Near Lake Geneva, WI
Posts: 20,054
|
Re: Can the Drive Belt tension be adjusted
Doc, have a look in the "ez-go tech" section at the top of the ez-go ga section. you can get a shorter belt for better low end on these carts.
No, you ca not adjust the drive belt. If you have to run up to 3/4 throttle to engage, you either have the wrong belt or a clutch problem. |
02-02-2012, 07:08 PM | #3 |
Getting Wild
Join Date: Sep 2007
Location: kemah texas
Posts: 94
|
Re: Can the Drive Belt tension be adjusted
i agree the short belt did wonders for mine, it was slipping and i didnt know it. got 5 hours on mine and its just now starting to act right. the short belt makes it a bit harder to shift and stuff at first.
|
02-02-2012, 09:01 PM | #4 |
Gone Wild
Join Date: Jan 2012
Location: Kansas City, Mo
Posts: 544
|
Re: Can the Drive Belt tension be adjusted
Thanks Guys I just came up from the shop and your right no way to adjust it. How do you get the length measurement? Do I just run a tape all the way around or what?
|
02-03-2012, 08:48 AM | #5 |
Getting Wild
Join Date: Sep 2007
Location: kemah texas
Posts: 94
|
Re: Can the Drive Belt tension be adjusted
is it a stock cart? chart for dayton belts http://www.daycoproducts.com/daycowe...dimensions.pdf i used a gates 6098. i think the stock is 41 1/2 and the gates is 40 3/8" cant remember for sure. a quick google search should find. if its not stock use a piece of string to get length
|
02-08-2012, 07:10 AM | #6 | |
Gone Wild
Join Date: Jan 2012
Location: Kansas City, Mo
Posts: 544
|
Re: Can the Drive Belt tension be adjusted
Quote:
|
|
02-09-2012, 11:52 AM | #7 |
Not Yet Wild
Join Date: Jan 2010
Location: Woodland, CA
Posts: 41
|
Re: Can the Drive Belt tension be adjusted
I'm in the market for a shorter belt as well and this is what I have found:
Stock belt for my '99TXT is a 72054 which is 1 3/8" wide and 42" OD Optional belts: EZGO 22337-G1 = 41" OD EZGO 27077-G02 = 40.75 OD Gates 6098 = 40 3/8" OD Dayco HP 2012 = 41" OD Folks in other threads have suggested going to a belt that is 1" shorter than stock in length which would be the EZGO 22337-G1 or the Dayco HP2012. I just called my buddy at Napa and gave him the Dayco HP2012 part # which he crossed over to the Gates 6098 and confirmed the OD length of 40 3/8". I'm hesitant to order the Gates since specs say it is 1 5/8" shorter than stock and yet others are saying it will fit. Can anyone shed some light on this? I would really like to order the correct belt. Thanks, Mark |
02-09-2012, 01:47 PM | #8 |
Gone Crazy
Join Date: Jan 2007
Location: Chesterfield, Va
Posts: 6,021
|
Re: Can the Drive Belt tension be adjusted
Doc, one thing I don't like about Ezgo is the spring in the drive clutch that holds it open, maybe there for an application that needs the enging to idle.
You have to rev the engine to get it to engage, I removed the drive clutch cover and removed the spring and now it engages as soon as the enging rev up and very smooth. On both my wifes cart and my Dads. |
02-09-2012, 02:05 PM | #9 |
Getting Wild
Join Date: Sep 2007
Location: kemah texas
Posts: 94
|
Re: Can the Drive Belt tension be adjusted
I have a gates 6098 on mine. 6 hours and it's just now acting right. Its pretty short and pretty hard to get on. But it does fit. It pulls much better than the worn stock belt. It runs pretty good. Oh yeah mine is a 99 or2000 txt. Can't remember. Would I buy it again? Yep
|
02-09-2012, 02:16 PM | #10 | |
Not Yet Wild
Join Date: Jan 2010
Location: Woodland, CA
Posts: 41
|
Re: Can the Drive Belt tension be adjusted
Quote:
|
|
|
|
Similar Threads | ||||
Thread | Forum | |||
Belt tension | Big Block Talk! | |||
belt tension question | Clone Engine Swaps | |||
How do you adjust drive belt tension on a g1 | Gas Yamaha | |||
Drive belt tension | Gas EZGO | |||
Engine swap belt tension | Big Block Talk! |