|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
05-08-2015, 01:54 PM | #1 |
Gone Wild
Join Date: Oct 2013
Posts: 243
|
Motor Testing
I am working on a ezgo txt and I have just bought batts for it. Before I go any farther I want to test the motor. Is there a way I can hook the batts up to it and lift the rear of the cart and make sure the motor runs. I have included a pic of what I have on it.....pretty much nothing
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
05-08-2015, 02:06 PM | #2 |
Gone Wild
Join Date: Oct 2013
Posts: 243
|
OK I got the wires on the batts and two wires headed towards the back right now.
|
05-08-2015, 02:52 PM | #3 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Motor Testing
Link 2 terminals as shown with red wire. Apply 12v car battery with jumper cables to terminals marked with green.
|
05-08-2015, 02:53 PM | #4 |
Gone Wild
Join Date: Oct 2013
Posts: 243
|
I don't see anything. No picture?
|
05-08-2015, 03:18 PM | #5 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,167
|
Re: Motor Testing
You should limit to around 12V for this motor test. Don't let it over-rev. Just make sure it runs.
|
05-08-2015, 03:23 PM | #6 |
Gone Wild
Join Date: Oct 2013
Posts: 243
|
Thanks
|
05-08-2015, 04:33 PM | #7 |
Gone Wild
Join Date: Oct 2013
Posts: 243
|
Nothing happens.....hope this motor is OK. Any other ideas
|
05-08-2015, 04:50 PM | #8 |
Gone Wild
Join Date: May 2012
Location: Rio Verde, Az
Posts: 7,167
|
Re: Motor Testing
Describe exactly how you set up your motor test. Picture or drawing would help.
|
05-08-2015, 04:58 PM | #9 |
Gone Wild
Join Date: Oct 2013
Posts: 243
|
Exactly the way u shown it in pic. I took the motor apart and I'm cleaning all the brush dust out of it now. I will hook it back up again when I get it cleaned. All the wires to the brushes are intact but there is a little build up on the armature so I will post pics when I get it cleaned.
|
05-08-2015, 05:37 PM | #10 |
Over This Interview Is...
Join Date: Jun 2012
Location: AZ
Posts: 17,449
|
Re: Motor Testing
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
Motor testing | Electric EZGO | |||
Motor Testing | Electric EZGO | |||
Testing motor | Electric Club Car | |||
Testing the motor | Electric Club Car | |||
Testing motor | Electric Club Car |