Golf cart security / theft protection

[Jaybird18]

Just spent 2 weeks at oceanlakes campground in myrtle beach which has thousands of carts. I seen alot of people using the CLUB around the steering wheel and windshield or seat post to " secure" the cart.

[ATXcowboy]

Has anyone had success installing digital guard dawg m1 on a 105ah RoyPow battery?

[w4thm]

Originally Posted by Sergio

I actually have one of those units I bought 8 years ago when I decided to do a hidden switch.

I got concerned with the reliability aspect of using it after looking at the PC board(s) electronics and the fact It also depends on your 12v converter.

You could replace the reed switch in this diagram with that RFID setup relay output.

Is that your plan or how are you latching the signal?

I'm thinking of using a mechanical latching relay. Wave the keyfob past the sensor, power on, repeat and power off.

[worleytech]

Made this for my 2001 EzGo TXT.
Stays under the seat when not in use.
Wheels are turned slightly to one side when locked.
Makes it harder to push away cause it won't go in a straight line.
But if towed it will buck around but still follow the towing vehicle.
If it makes it to a shop somewhere just about anything can be cut off...

[ATXcowboy]

Originally Posted by ATXcowboy

Has anyone had success installing digital guard dawg m1 on a 105ah RoyPow battery?

I just realized this was a bad question. Has anyone installed a digital guard dawg on a 12v voltage reducer? I think that’s the correct question.

[cgtech]

When I install a "disabler" on a RXV, i interrupt the blue wire from the charge port. It stops the car from driving, and disables the ability to put it in "tow" to unlock the brake as well. 2 birds, one stone. (No key/tow-run positions will unlock it)

Well, I know for 100% it works on Curtis RXVs, cant remember if it does that on Danaher rxv or not.

[ATXcowboy]

Anyone install the digitalguarddawg gc -48v?
Found out the M1 doesn’t work with push to start.