|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
06-19-2017, 02:21 PM | #1 |
Not Yet Wild
Join Date: Oct 2010
Posts: 54
|
1996 EZ-GO DCS failed test 5 of testing procedure
1996 EZ-GO DCS failed test 5 of testing procedure found here: http://www.***********.com/tech/ezgo...oubleshoot.pdf
What does this mean? I have 36V on the blue wire when first flipping the tow/run switch to run. When I press the gas pedal the solenoid clicks and the voltage on the blue wire drops to 0. I cannot get the solenoid to click again until I flip the tow/run switch off and on again. Cart will not run. Thanks for the help! |
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
06-19-2017, 02:30 PM | #2 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
|
Re: 1996 EZ-GO DCS failed test 5 of testing procedure
This is one of the common failures for this controller. You can replace it now because death is eminent. Or you can prolong it's useful life by running a wire from the big controller B- to the solenoid small post where the black wire is... (after u remove the original black wire)
|
06-19-2017, 02:35 PM | #3 |
Gone Mad
Join Date: Oct 2009
Location: Buford, GA
Posts: 8,988
|
Re: 1996 EZ-GO DCS failed test 5 of testing procedure
"Wifey, my controller is dead, and I need to upgrade it." Really doesn't work with me any more, as she's got me figured out. However, she supports my "healthy" addictions.
|
06-19-2017, 03:47 PM | #4 | |
Not Yet Wild
Join Date: Oct 2010
Posts: 54
|
Re: 1996 EZ-GO DCS failed test 5 of testing procedure
Quote:
|
|
06-19-2017, 04:06 PM | #5 |
Happy Carting
Join Date: Dec 2007
Location: Southern California
Posts: 73,356
|
Re: 1996 EZ-GO DCS failed test 5 of testing procedure
Replace the blue wire as suggested.
|
06-19-2017, 04:21 PM | #6 |
Not Yet Wild
Join Date: Oct 2010
Posts: 54
|
Re: 1996 EZ-GO DCS failed test 5 of testing procedure
Also my cart does not have a M- terminal on the controller as seen in the wiring diagram. It has an A1. Is this the same as M- terminal?
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
RXV Failed Brake Test | Electric EZGO | |||
G14e f&r switch test procedure | Electric Yamaha | |||
Is there a test procedure for a Pulser Coil? | Gas EZGO | |||
48V Motor Testing Procedure? | Electric Club Car | |||
marathon troubleshooting & testing procedure | Electric EZGO |