|
Electric EZGO Electric EZ GO Marathon, Medalist, TXT and RXV. |
|
Thread Tools | Display Modes |
10-18-2017, 11:18 AM | #1 |
Not Yet Wild
Join Date: Nov 2015
Location: Fort Payne AL
Posts: 42
|
EZGO Medalist controller replacement
The controller that burned up was a 5 pin 4 lug controller. The only replacement we can find is a 5 pin 3 lug. Do I just leave the cable off that would go from the f/r switch to the 4th lug. Thanks guys.
|
Today | |
Sponsored Links
__________________
This advertising will not be shown in this way to registered members. Register your free account today and become a member on Buggies Gone Wild Golf Cart Forum |
|
10-18-2017, 11:27 AM | #2 |
Techno-Nerd
Join Date: Jun 2011
Location: West Virginia
Posts: 19,654
|
Re: EZGO Medalist controller replacement
Yes.
If the cable from A2 on the motor isn't long enough to go all the way to the C (top) stud on the F/R switch, bolt the two cables that were connected to the old controller's A2 terminal together and insulate the connection. |
10-18-2017, 11:37 AM | #3 |
Not Yet Wild
Join Date: Nov 2015
Location: Fort Payne AL
Posts: 42
|
Re: EZGO Medalist controller replacement
Thank you very much
|
|
Thread Tools | |
Display Modes | |
|
Similar Threads | ||||
Thread | Forum | |||
94 Ezgo TXT Medalist Controller | Electric EZGO | |||
1994 EZGO Medalist Motor Replacement | Electric EZGO | |||
95 ezgo 36v medalist controller selection | Electric EZGO | |||
94 ezgo medalist controller | Electric EZGO | |||
controller replacement 96 EZGo | Electric EZGO |